Wear-resistant titanium carbide rods - special for mechanical parts
The length of this round bar can be customized according to requirements, ranging from 100mm to 1000mm, and it can undergo secondary processing such as precision grinding and wire cutting to produce parts of various complex shapes. Although its price is higher than that of ordinary cemented carbide, after considering its service life and processing efficiency comprehensively, the cost per unit product is actually lower. In the gear processing industry, the hobs made from it can ensure that the gear tooth surface accuracy reaches grade 6 or above, meeting the demands of high-end mechanical transmission. As a key material in the high-end manufacturing field, hard alloy titanium carbide round rods have excellent corrosion resistance and are not prone to rust or deterioration when used in damp, acidic or alkaline environments. Its thermal conductivity is 15% higher than that of traditional tungsten carbide round rods, which can quickly dissipate the heat generated during the cutting process and reduce the risk of tool wear due to overheating. The bending strength of the round bar can reach 2500MPa, featuring both high hardness and certain toughness, thus avoiding the problem of breakage due to impact during use. In the aerospace field, precision machining tools are often used to make engine components, meeting the requirements of high-precision machining.
在线联系供应商
Other supplier products
 |
TitaniTitanium carbide guide wheels with no scratch contamination on the surfaceum carbide guide wheels with no scratch contamination on the surface | 硬质合金碳化钛导轮具有优异的抗冲击性能。当丝突然受力或断裂时，它们不易裂纹或变形，从而降低设备停机的风险。它具有优异的热传导性能，可以迅速散发摩擦产生的热量，使导轮的工作温度保持在80℃以内，防止丝因过热而退火。在弹簧钢丝的生产中，使用这种导轮可以将钢丝的直线度误差控制在0.5mm/m以内，从... |
 |
Micron-grade titanium carbide guide wheels | Carbide titanium carbide guide wheel is the key guiding parts in the production of wire and pipe, which is made of high purity titanium carbide a... |
 |
Titanium carbide hard rods - resistant to acid and alkali corrosion | The length of this round bar can be customized according to specific requirements, ranging from 100mm to 1000mm. It is applicable to secondary proc... |
 |
High-strength titanium carbide rods - for ceramic processing | The manufacturing process of this round bar is highly stringent, encompassing rigorous control over the purity of titanium carbide powder (purity &... |
 |
Titanium carbide powder, a raw material for wear-resistant and corrosion-resistant coatings | This powder has excellent electrical and thermal conductivity, with an electrical conductivity of 3×10⁴S/m and a thermal conductivity of 35W/... |
Same products
 |
3D printing spherical titanium carbide powder | 卖方: 株洲华斯盛高科材料有限公司 | This batch of titanium carbide powder (TiC) has a purity of over 99.5%, with a particle size cont... |
 |
Titanium carbide hard alloy drive wheel - Specialized | 卖方: 株洲华斯盛高科材料有限公司 | The titanium carbide (TiC) guide wheel is fabricated via high-temperature powder metallurgy sinte... |
 |
Industrial guide wheels, titanium carbide wear-resistant alloy | 卖方: 株洲华斯盛高科材料有限公司 | This carbonized titanium (TiC) guide wheel is formed by high-temperature sintering of 99.5% pure ... |
 |
Unfinished bar stock - heat treatable | 卖方: 株洲华斯盛高科材料有限公司 | This high-purity titanium carbonitride (TiCN) round bar is fabricated via hot-pressing and sinter... |
 |
Steel-based titanium carbide hard alloy round bar | 卖方: 株洲华斯盛高科材料有限公司 | This carbonitride round bar (TiC) is formed by hot-pressing and sintering 99.5% high-purity carbo... |
