Unfinished bar stock - heat treatable
This high-purity titanium carbonitride (TiCN) round bar is fabricated via hot-pressing and sintering of ultrafine TiCN powder (particle size: 1–3 μm, purity ≥ 99.6 wt%). Available in diameters ranging from φ3 mm to φ120 mm and lengths from 50 mm to 1500 mm, dimensions and surface finishes—including single-end or four-end precision grinding, threading, and custom surface treatments—are fully customizable. The material exhibits a theoretical density of 6.68 g/cm³, Vickers hardness equivalent to HRA ≥ 92, compressive strength ≥ 3200 MPa, and fracture toughness ≥ 6.0 MPa·m¹/². Microstructural analysis confirms full densification with no detectable porosity. Surface roughness is controlled to Ra ≤ 0.4 μm; dimensional tolerance is ±0.01 mm, and straightness is maintained at ≤ 0.02 mm/m—free from cracks, inclusions, or other surface defects. The component demonstrates exceptional resistance to wear, high-temperature oxidation (retaining mechanical integrity up to 1200 °C, with continuous service capability ≤ 1600 °C), and chemical corrosion—including exposure to acidic and alkaline environments. It is widely employed in demanding applications such as hardmetal tool blanks, mechanical seals, mining drill bits, precision molds and dies, aerospace structural components, electronic conductive elements, and high-temperature metallurgical and chemical processing equipment. As a reinforcement phase in advanced composites or as a near-net-shape structural component, it delivers 5–8× extended service life compared to conventional metallic bars. All batches undergo rigorous quality control per ISO-certified manufacturing protocols and are accompanied by comprehensive material test reports verifying composition, microstructure, mechanical properties, and dimensional conformity. Products are vacuum-packaged to ensure integrity during transit.
在线联系供应商
Other supplier products
 |
Industrial guide wheels - titanium carbide alloy wear-resistant | Hard alloy titanium carbide guide wheels serve as critical guiding components in the manufacturing processes of wire and tubular materials. These c... |
 |
Super wear-resistant cemented carbide round rods | Titanium carbide cermet rods (TiC rods) belong to the group of steel-jointed cemented carbides, which are composites of steel as the bonding phase ... |
 |
High-strength titanium carbide rods - mechanical parts | The hard alloy titanium carbide guide wheel has excellent thermal shock resistance. It will not crack when the temperature rises sharply from room ... |
 |
Titanium carbide hard alloy guide wheels - accessories | The installation holes of the guide wheel have high precision, and the fit clearance with the shaft can be controlled within 0.005-0.01mm, ensuring... |
 |
Titanium carbide hard alloy guide wheel - transmission | The installation holes of the guide wheel have high precision, and the fit clearance with the shaft can be controlled within 0.005-0.01mm, ensuring... |
Same products
 |
3D printing spherical titanium carbide powder | 卖方: 株洲华斯盛高科材料有限公司 | This batch of titanium carbide powder (TiC) has a purity of over 99.5%, with a particle size cont... |
 |
Titanium carbide hard alloy drive wheel - Specialized | 卖方: 株洲华斯盛高科材料有限公司 | The titanium carbide (TiC) guide wheel is fabricated via high-temperature powder metallurgy sinte... |
 |
Industrial guide wheels, titanium carbide wear-resistant alloy | 卖方: 株洲华斯盛高科材料有限公司 | This carbonized titanium (TiC) guide wheel is formed by high-temperature sintering of 99.5% pure ... |
|
|
Unfinished bar stock - heat treatable | 卖方: 株洲华斯盛高科材料有限公司 | This high-purity titanium carbonitride (TiCN) round bar is fabricated via hot-pressing and sinter... |
 |
Steel-based titanium carbide hard alloy round bar | 卖方: 株洲华斯盛高科材料有限公司 | This carbonitride round bar (TiC) is formed by hot-pressing and sintering 99.5% high-purity carbo... |
