Chromium carbide powder that extends the service life of rolls by five times
This chromium carbide powder is black in color, with a particle size of 5-25μm, a purity of over 99%, and extremely low impurity content. The particles have good dispersibility and are easy to mix with the metal matrix. After powder metallurgy sintering, highly wear-resistant parts can be produced. It is applicable to precision bearings, micro gears and other precision instrument components, which can reduce wear and improve the operational accuracy and stability of equipment. This powder has good chemical stability. At room temperature, it does not react with water or dilute acids, but dissolves slowly in concentrated nitric acid and hydrofluoric acid. It is suitable for making corrosion-resistant components. After being mixed with nickel-based alloy powder, the formed spray welding layer is both wear-resistant and corrosion-resistant. It is widely used in the stirring shafts of chemical equipment, the inner walls of reaction vessels and other parts, and can withstand the long-term erosion of acid and alkali solutions. The powder has good fluidity, with a bulk density of 2.8-3.2g/cm³, which is convenient for continuous powder supply by automated spraying equipment and ensures uniform coating thickness.
在线联系供应商
Other supplier products
 |
Nano grade titanium carbide alloy round bar | 该圆棒的生产工艺极其严谨，从碳化钛粉末纯度的控制（纯度≥99.5%）到烧结温度的精确调控（约1500℃），每一个环节都影响着最终的性能。成品尺寸稳定性极佳，在-50℃至300℃的温度变化下，热膨胀系数仅为6×10-⁶/℃，远低于金属材料，确保了精密工具在不同环境下的精度。它广... |
 |
Titanium carbide powder suitable for surface strengthening treatment | Titanium carbide powder can be mixed with other carbide powders (such as tungsten carbide and vanadium carbide) to form multi-component composite p... |
 |
Titanium carbide hard alloy drive wheel accessory | This guide wheel is customizable with various groove geometries—including V-shaped, U-shaped, and semi-circular profiles—tailored to th... |
 |
Chromium carbide powder with surface finish Ra0.02μm | The powder has a high hardness, with a microhardness of up to 2200HV. The hardness of the wear-resistant coating prepared from it can reach over HR... |
 |
High-hardness titanium carbide rods - superior cutting edge material | 由硬质合金制成的碳化钛圆棒具有优异的抗粘连性能。加工铝合金、铜合金等粘性材料时，不易出现“刀具粘连”现象，确保加工表面光滑。通过涂层处理（例如TiAlN涂层），其表面耐磨性和抗氧化性可进一步提升，刀具寿命可延长50%以上。在医疗器械领域，常用于制造骨科手术器械，不仅保证... |
