Titanium carbide rods are wear-resistant and heat-resistant
Titanium carbide-based cemented carbide round bars, as a critical material in high-end manufacturing, exhibit outstanding corrosion resistance, demonstrating minimal susceptibility to rust or degradation in humid, acidic, or alkaline environments. With a thermal conductivity approximately 15% higher than that of conventional tungsten carbide round bars, they enable efficient dissipation of heat generated during cutting operations, thereby reducing the risk of tool wear caused by thermal overload. These round bars possess a bending strength of up to 2500 MPa, combining high hardness with adequate toughness, which effectively prevents fracture under impact loading. In aerospace applications, precision cutting tools fabricated from this material are widely employed in the machining of engine components, satisfying stringent requirements for high-precision manufacturing. The length of the round bars can be customized within the range of 100 mm to 1000 mm and are amenable to secondary processing techniques such as precision grinding and wire electrical discharge machining, enabling the production of complex-shaped components. Although the initial cost is higher compared to standard cemented carbides, the extended service life and improved processing efficiency result in a lower unit production cost over time. In the gear manufacturing industry, hobs made from this material ensure gear tooth profile accuracy of grade 6 or higher, fulfilling the performance demands of advanced mechanical transmission systems.
在线联系供应商
Other supplier products
 |
Fatigue life increased by 50% Titanium carbide round rods | titanium carbide round bars can be customised with different properties by adjusting the titanium carbide content (usually 70-90%) and binder rat... |
 |
Military-grade titanium carbide hard alloy round bar | titanium carbide round bars can be customised with different properties by adjusting the titanium carbide content and binder ratio. When the tita... |
 |
Titanium carbide guide wheel - for industrial use | Hard alloy titanium carbide guide wheels are key guiding components in the production of wire and tube materials. They are made by powder metallurg... |
 |
Industrial titanium carbide rods - fast custom processing | Titanium carbide round rods of cemented carbide are high-performance rods made by powder metallurgy process, with titanium carbide as the main hard... |
 |
Highly reactive titanium carbide powder | Titanium carbide TiC powder are mainly used in the steel-bonded cemented carbide, cermet components, tungsten-cobalt-titanium cemented carbide and ... |
Same products
 |
3D printing spherical titanium carbide powder | 卖方: 株洲华斯盛高科材料有限公司 | This batch of titanium carbide powder (TiC) has a purity of over 99.5%, with a particle size cont... |
 |
Titanium carbide hard alloy drive wheel - Specialized | 卖方: 株洲华斯盛高科材料有限公司 | The titanium carbide (TiC) guide wheel is fabricated via high-temperature powder metallurgy sinte... |
 |
Industrial guide wheels, titanium carbide wear-resistant alloy | 卖方: 株洲华斯盛高科材料有限公司 | This carbonized titanium (TiC) guide wheel is formed by high-temperature sintering of 99.5% pure ... |
 |
Unfinished bar stock - heat treatable | 卖方: 株洲华斯盛高科材料有限公司 | This high-purity titanium carbonitride (TiCN) round bar is fabricated via hot-pressing and sinter... |
 |
Steel-based titanium carbide hard alloy round bar | 卖方: 株洲华斯盛高科材料有限公司 | This carbonitride round bar (TiC) is formed by hot-pressing and sintering 99.5% high-purity carbo... |
