CARBIDE STRIPS
Tungsten carbide stripsare referring the rectangular tungsten carbide rod, also known as tungsten carbide flats.It is produced by the same way as carbide rod, through powder(Mainly WC and Co powder as per formula) mixture, ball milling, spray tower drying, extruding, drying, sintering, (and cutting or grinding if necessary) final inspection, packing, then delivery, middle inspection is done after each process to make sure only the qualified products can be moved to next production process.
The carbon sulfur analyzer, HRA tester, TRS tester, Metallographic microscope(Check microstructure), coercive force tester, cobalt magnetic tester are used to inspect and make sure the material of carbide strip is good qualified, besides, drop test is added specially to the carbide strip inspection to make sure there is no material flaw in the whole long strip. And the size inspection as per order.
Application of carbide strips:
Woodworking blades.
Cut to small pieces to be welded as cutter blades.
Grinding support plate in grinding machines.
Other applications.
|
Size |
Thickness (mm) |
Width (mm) |
Width Tol. (mm) |
Length (+1/+5mm) |
|
|
2x4 |
2 |
+0.1/+0.3 |
4 |
+0.2/+0.4 |
310 |
|
2x6 |
2 |
+0.1/+0.3 |
6 |
+0.2/+0.4 |
310 |
|
2x8 |
2 |
+0.1/+0.3 |
8 |
+0.2/+0.4 |
310 |
|
2x10 |
2 |
+0.1/+0.3 |
10 |
+0.2/+0.4 |
310 |
|
2x12 |
2 |
+0.1/+0.3 |
12 |
+0.2/+0.4 |
310 |
|
2x14 |
2 |
+0.1/+0.3 |
14 |
+0.2/+0.4 |
310 |
|
2x16 |
2 |
+0.1/+0.3 |
16 |
+0.2/+0.4 |
310 |
|
2x18 |
2 |
+0.1/+0.3 |
18 |
+0.2/+0.4 |
310 |
|
3x3 |
3 |
+0.1/+0.3 |
3 |
+0.2/+0.4 |
310 |
|
3x4 |
3 |
+0.1/+0.3 |
4 |
+0.2/+0.4 |
310 |
|
3x6 |
3 |
+0.1/+0.3 |
6 |
+0.2/+0.4 |
310 |
|
3x8 |
3 |
+0.1/+0.3 |
8 |
+0.2/+0.4 |
310 |
|
3x10 |
3 |
+0.1/+0.3 |
10 |
+0.2/+0.4 |
310 |
|
3x12 |
3 |
+0.1/+0.3 |
12 |
+0.2/+0.4 |
310 |
|
3x15 |
3 |
+0.1/+0.3 |
15 |
+0.2/+0.6 |
310 |
|
3x20 |
3 |
+0.1/+0.3 |
20 |
+0.2/+0.6 |
310 |
|
3x25 |
3 |
+0.1/+0.3 |
25 |
+0.2/+0.6 |
310 |
|
4x5 |
4 |
+0.1/+0.3 |
5 |
+0.2/+0.4 |
310 |
|
4x6 |
4 |
+0.1/+0.3 |
6 |
+0.2/+0.4 |
310 |
|
4x8 |
4 |
+0.1/+0.3 |
8 |
+0.2/+0.4 |
310 |
|
4x10 |
4 |
+0.1/+0.3 |
10 |
+0.2/+0.4 |
310 |
|
4x12 |
4 |
+0.1/+0.3 |
12 |
+0.2/+0.4 |
310 |
|
4x13 |
4 |
+0.1/+0.3 |
13 |
+0.2/+0.4 |
310 |
|
4x15 |
4 |
+0.1/+0.3 |
15 |
+0.2/+0.6 |
310 |
|
4x16 |
4 |
+0.1/+0.3 |
16 |
+0.2/+0.6 |
310 |
|
4x18 |
4 |
+0.1/+0.3 |
18 |
+0.2/+0.6 |
310 |
|
4x20 |
4 |
+0.1/+0.3 |
20 |
+0.2/+0.6 |
310 |
|
4x25 |
4 |
+0.1/+0.3 |
25 |
+0.2/+0.6 |
310 |
|
Size |
Thickness (mm) |
Thickness Tol. (mm) |
Width W (mm) |
Width Tol. (mm) |
Length (+1/+5mm) |
|
3x6-55° |
3 |
+0.1/+0.3 |
6 |
+0.2/+0.4 |
310 |
|
3x8-55° |
3 |
+0.1/+0.3 |
8 |
+0.2/+0.4 |
310 |
|
3x9-55° |
3 |
+0.1/+0.3 |
9 |
+0.2/+0.4 |
310 |
|
3x10-55° |
3 |
+0.1/+0.3 |
10 |
+0.2/+0.4 |
310 |
|
3x12-55° |
3 |
+0.1/+0.3 |
12 |
+0.2/+0.4 |
310 |
|
3x30-55° |
3 |
+0.1/+0.3 |
30 |
+0.2/+0.4 |
310 |
|
4x10-55° |
4 |
+0.1/+0.3 |
10 |
+0.2/+0.4 |
310 |
As one of the most professional carbide tool manufacturers, Xiamen Betalent Carbide Co., Ltd provides carbide product, tungsten carbide cutter, tungsten carbide rods for sale, etc. Contact us to know more.
在线联系供应商
Other supplier products
 |
PARTING AND GROOVING INSERT | Parting and grooving inserts are inserts for cylinder parting and grooving, including to the outer circular, the inner hole groove, the cutter wit... |
 |
WEAR PARTS | Carbide wear resistant partsare made of tungsten carbide and cobalt alloy. Tungsten carbide has superior properties, good wear resistance, and high... |
 |
WIRE DRAWING DIE BLANK | According to the working properties, the structure of drawing die core can be divided into five sections: "entrance area, lubrication area, working... |
 |
TWIST DRILL BIT | Betalent twist drill bits are manufactured by Walter 5-axil grinding machine base on submicron grain size tungsten carbide rods, which enable the e... |
 |
CARBIDE STRIPS | Carbide flatsare referring the rectangular tungsten carbide rod, also known as tungsten carbide strips.It is produced by the same way as carbide ro... |
Same products
 |
4 FLUTE, 0.2 MM FLAT CARBIDE END MILL, SMALL DIAMETER MILL CUTTER FOR STAINLESS STEEL | 卖方: Xiamen Talent Carbide Co.,Ltd | 4 FLUTE, 0.2 MM END MILL, SMALL DIAMETER MILL CUTTER FOR STAINLESS STEEL ... |
 |
3 FLUTE, 16MM FLAT CARBIDE END MILL, MILL CUTTER FOR ALUMINUM | 卖方: Xiamen Talent Carbide Co.,Ltd | 3 FLUTE, 16MM CARBIDE END MILL, MILL CUTTER FOR ALUMINUM Grain size Cut... |
 |
2 FLUTE, 5MM BALL NOSE END MILL, SMALL DIAMETER MILL CUTTER | 卖方: Xiamen Talent Carbide Co.,Ltd | 2 FLUTE, 5MM END MILL, SMALL DIAMETER CARBIDEMILLINGCUTTERS Grain size ... |
 |
2 FLUTE, 18MM FLAT CARBIDE END MILL, MILL CUTTER | 卖方: Xiamen Talent Carbide Co.,Ltd | 2 FLUTE, 18MM END MILL, MILL CUTTER Grain size Cutting dia. 18... |
 |
2 FLUTE, 0.8 MM BALL NOSE END MILL, SMALL DIAMETER MILL CUTTER | 卖方: Xiamen Talent Carbide Co.,Ltd | 2 FLUTE, 0.8 MMENDMILL, SMALL DIAMETER MILL CUTTER Grain size Cutti... |
