Heavy Gauge Slitting Lines
RISHBIN Heavy Gauge Slitters are designed to slit high strength heavy gauge materials. Coils max. thickness of up to 20mm, max. width of up to 2500mm, and speed of up to 60 m/min. It consists of Decoiler with coil car, guiding & pinch device, heavy gauge slitters, dual head/quick tooling change for slitter is available, scrap winder, side-guiding device, looping, tension device, recoiler. Different materials could be suitable to be processed in the line, such as pre painted steel coil, cold rolled steel coil, hot rolled carbon steel coil, stainless steel coil, copper, brass, aluminum and titanium. Here you cna buy high quality slitting machines.
To help you achieve your own production capacity target, RISHBIN Slitter supplies many options, such as high speed slitting, medium speed slitting, etc. All slitters are easy to operate. They are very reliable, steady performers for both short and long terms running productions.
The thickness can range from the thinnest down to 3.0 mm, to the thickest up to 20 mm
Strip Width, from the narrowest 400 mm to the widest 2500 mm
Coils Weight, up to 35 tons
Line Speed, up to 60 m/min.
- Minimum Burr on strip.
- Automatic Coil Loading
- 2 complete slitting heads for quick offline tooling changeovers.
- Straight edged recoiling.
- Economic efficency due to high automation level.
- Ease of Operation and Maintenance
- Slitting Lines are available in different sizes and models as per the demands and specifications laid by the clients.
- It is available in different capacities and standards according to the demand of the clients.
- These Slitting Lines are widely appreciated amongst our clients for their user friendly designs and high resistance to temperature variations.
Working procedure:
In the beginning, the coil is loaded on the coil car by crane and brought to the uncoiler by operating the coil car. Coil car centralizes the coil with the uncoiler mandrel and the coil is mounted on the uncoiler. Mandrel is expanded. Snubber roll rotates the coil. Peeler breaks the straps and brings the pre end upto Pinch roll. The Pinch roll drives the coil end upto the slitter. Then its drive is disconnected. Slitter moves the slitted strips further. Slitted strips are threaded through loop table and drag tensioner into the recoiler drum. Recoiler winds one turn on loose coil.
Then drag tensioner and loop are put into operation. Slitter and recoiler run simultaneously in synchronization. As the coil build up, the recoiler rpm correspondingly goes down to keep desired constant line speed. This process goes on until the end of coil on uncoiler. The slitted coil is pushed on the exit coil car through a pusher plate operated by hydraulic cylinder. The side slitted scrap is wound on the scrap winder units provided on both sides of the slitter.
|
Model No. |
RS 3.0-12.0 |
RS 4.0-16.0 |
RS 6.0-20.0 |
|
|
Coil Material |
CR Coils , HR Coils, S.S Steel Coils, GI Coils,AL Coils, Copper Coils Picking Oil Coils |
|||
|
Coil Thickness |
3.0～12.0mm |
4.0～16.0mm |
6.0～20.0mm |
|
|
Line Speed |
0～60m/min |
0～50m/min |
0-50m/min |
|
|
Coil Weight |
≤30T(35T) |
≤30T(35T) |
≤30T(35T) |
|
|
Coil I.D |
φ508,φ610,φ760mm |
φ508,φ610,φ760mm |
φ508,φ610,φ760mm |
|
|
Coil O.D |
≤φ2200mm |
≤φ2500mm |
≤φ2500mm |
|
|
Strip Width |
≥100mm |
≥100mm |
≥100mm |
|
|
Number of Strip |
5～20 |
≤5 |
≤5 |
|
|
Slitting Accuracy |
±1.0mm |
±1.0mm |
±1.0mm |
|
|
Blade shaft |
Ф320 |
Ф340mm |
Ф360mm |
|
|
Electrical Control System |
PLC Automatic control |
PLC Automatic control |
PLC Automatic control |
|
Specifications
|
COIL/ROLL DETAILS |
Material |
HR, CR, SS, GI, PPGI, |
|
Tensile Strength |
δb≤550Mpa，δS≤260Mpa |
|
|
Coil/Roll thickness |
6-20mm |
|
|
Steel Coil/Roll width |
600-2500（Max） |
|
|
Coil/Roll I.D |
Φ500-760 mm |
|
|
Coil/Roll O.D |
Φ2500mm（Max） |
|
|
Steel Coil/Roll Weight |
35T（Max） |
|
|
Slitter parameters |
knife pivot diameter |
Ф360 mm |
|
Knife pivot material |
40Cr |
|
|
Blades specification |
Φ360mmXφ360mmX20mm |
|
|
Blade material |
6CrW2Si |
|
|
Max slit quantity |
4 pcs (16mm)8 pcs(8mm)(Customized) |
|
|
Width precision |
≤±0.05mm/2M |
|
|
Other parameters |
Power |
380V/50Hz/3Ph(Customized) |
|
Line speed |
0-60m/min |
|
|
Capacity |
450 KW |
|
|
Whole line Dimension |
45m(L)X10m(W) |
|
|
Line direction |
From right to left(Face to machine) |
|
|
Machine color |
Blue |
在线联系供应商
Other supplier products
 |
Steel Slitting Line/Machine | Based on much experiences on providing quality, cost-effective and long lasting roll forming systems Operating Procedure of Steel Slitting Line... |
 |
Light Gauge Slitting Lines | RISHBIN Light Gauge Slitters for pre-painted/coated coils, max. thickness of up to 3mm, max. width of up to 2200mm, and speed of up to 300 m/min.... |
 |
Type of Flying Shearing Machine | Mechanical flying shear is mainly used for rapid shearing processing equipment of metal plates. The following Rishbin machinery will tell you abou... |
 |
Heavy Gauge Cut To Length Lines | is a high efficient metal processing production line for cutting metal flat sheet from metal coils. The metal coils unwind, leveled, cut to lengt... |
 |
Steel Sheet Slitting Machine | Based on much experiences on providing quality, cost-effective and long lasting roll forming systems Metal steel sheet slitting machine main typ... |
Same products
 |
Centrifugally cast Chromium-Nickel alloy tubes | 卖方: Nanjing Xinshuo Mechanical Equipment Co., Ltd. | Centrifugally cast Chromium-Nickel straight alloy tubes |
 |
STAINLESS STEEL PIPE/TUBE | 卖方: YUHONG GROUP CO., LIMITED ZHEJIANG YUHONGWELL STEEL CO., LIMITED | STAINLESS STEEL PIPE/TUBE Stainless steel pipe/tube is one of the most widely used in manufactur... |
 |
Stainless Steel Plugger, Spreader Files (Hand) | 卖方: Tangshan UMG Medical Instrument Co.,Ltd. | Made of medical stainless steel or nickel-titanium alloy, used for filling the working part of ro... |
 |
Stainless Steel K-FLEXOFILE (Hand) | 卖方: Tangshan UMG Medical Instrument Co.,Ltd. | Made of medical-grade stainless steel, the cross section is triangular thread tight and sharp and... |
 |
Stainless Steel H,K,R Files (Hand) | 卖方: Tangshan UMG Medical Instrument Co.,Ltd. | Material Stainless steel Length 21mm 25mm 28mm 31mm Product Feature of Stainless Steel H,... |
