High Performance Silicone Adhesive/Sealant - 3334
FEATURES OF heat and water resistant sealantheat proof silicone adhesive- 3334
Convenient: one-part, deoximation, rapid cure at room temperature
Neutral, no corrosion to metal, anti-yellowing. Excellent adhesive to hard bonding materials without prime
Use at: -50~200℃
Excellent insulation
Resistance to weather, temperature, chemical erosion and aging
Can be exempted from ultraviolet light, ozone and chemical effects outdoors
Color: white, grey, black
Multiple packaging sizes are available for this product, 50ml plastic tubes, 2.6L plastic bottles and 20L barrels
Shelf life: 6 months from the production date
Adhesion, water-proof, encapsulate of electronic components, instruments, sensors, remote sensing system and control components.
Description
ECHNICAL DATAOF GOLOHO-3334
|
Uncured |
|
|
Appearance |
Flowing |
|
Color |
white, grey, black |
|
(25℃,75%)Surface cure, min |
5~35 |
|
Integrated cure hr |
24 |
|
Electric/mechnical properties(25℃, 75%, 7days) |
|
|
Specific gravity |
|
|
Durometer Shore |
30 |
|
Tensile strength(Mpa) |
|
|
Elongation(%) |
≥200 |
|
Shear strength(Mpa) |
|
|
Dielectric strength(kv/mm) |
21 |
|
Dielectric constant(60Hz) |
|
|
Dissipation factor(60Hz) |
5× 10-2 |
|
Volume resistance(Ω﹒cm) |
|
USE AND STORAGE OF GOLOHO-3334
Avoid contact with skin, eyes and clothing. Wash eyes for 15min once touch with it. Remove material from skin with dry cloth, water and soap.
Wash hands after using
Storage: keep in a dry place at 5~25℃
HANDLING PRECAUTIONS OF GOLOHO-3334
To ensure all the protected surfaces be clean and dry
Diameter: based on the sealing surface gap
Cure time: be different with temperature and humanity
PHYSICAL AND CHEMICAL PROPERTIES OF GOLOHO-3334
white/grey/black
Appearance(state): flowing
Density(25℃):>1
Solubility: indissolvable
Flammability: fire resistance
Volatility: none
TRANSPORT INFORMATION
Not restricted
FACILITIES OF GOLOHO-3334
Global or local exhausting and flushing facilities.
Without notice, the contents of this article may be changed due to the product performance improvement and specification.
We just only ensure the specifications of our products. You have to test the product before using to conform if it is suitable for your use.
Our products are developed for general industrial use.
The data are real expression in the existing test methods and results of GOLOHO POLYMER in this paper. However, because of the uniqueness of every application, the product information can never replace necessary testing before user's applying. The user's test results are the only way to ensure the product is suitable for their specific application requirements. Therefore, unless a written guarantee, GOLOHO POLYMER only ensures the products comply with the factory specifications. GOLOHO POLYMER never recognizes any other form of guarantee and claim clause. GOLOHO POLYMER has the right to test again for product quality if there is any quality problem. GOLOHO POLYMER will provide replacement or refund if any quality problem confirm. Users should be responsible for ensuring that their applications comply with local safety regulations and obtain the necessary certifications and recognition. GOLOHO POLYMER does not undertake any responsibility for any safety and loss problems.
Please contact the company's customer service if you want to reprint the contents of the products. Customer service hotline: ; for more details, please visit web site:
Please contact the GOLOHOcustomer service if you want to reprint the contents of the heat proof silicone adhesive, heatproof siliconeand heat proof mastic. Also we will provide silicone adhesive priceto you .
在线联系供应商
Other supplier products
 |
Two-Part, 1 To 1 Mix Ratio Transparent Silicone Gel - 324C-AB | SPECIAL FEATURES OF GOLOHO-324C-AB 1:1 Two-part, 1:1 mix ratio Low viscosity Room temperature accelerated cure, no small molecule release Suitable ... |
 |
High Performance Silicone Adhesive/Sealant - 2402W | FEATURES OF HEAT RESISTANT RTV SILICONE GLUE GOLOHO-2402W GOLOHO-2491 is a high-performance heat resistant glue for electronics ·Convenient... |
 |
RTV-1 Silicone Rubber | RTV-1 silicone is a condensed silicone rubber that is gradually cured from outside to inside by contacting with moisture in the air. It can be also... |
 |
Two-Part, 1 To 1 Mix Ratio Transparent Silicone Gel - 324C-AB | SPECIAL FEATURES OF GOLOHO-324C-AB 1:1 Two-part, 1:1 mix ratio Low viscosity Room temperature accelerated cure, no small molecule release Suitable ... |
 |
Addition Silicone Rubber | GOLOHO heat cured silicone rubberproduces no by-products in the curing process, allowing their use in deep section and complete confinement. GOLOHO... |
Same products
 |
Silicone Rubber Mold | 卖方: Packson Mold Co.,Ltd | Silicone rubber is a kind of elastic material, which is widely used in industry and family. It ha... |
 |
Embossed Silicone Rubber Wristbands/Bracelets Bulk | 卖方: Yppromotion | In addition to those ordinary wristband types, YP Promotion also has a novel technology that can ... |
 |
SILICONE BRACELET | 卖方: Yppromotion | The silicone bracelet is made of solid silicone rubber pressed by an oil press. Wholesale persona... |
 |
Silicone Square ICE Cube Tray | 卖方: Shenzhen YF Technology Co.,Ltd | The square ice cube mold is square in shape, square in shape and rectangular in shape. It is main... |
 |
Silicone Sports Bottle | 卖方: Shenzhen YF Technology Co.,Ltd | Silicone Water Bottle Review Silicone sports bottle is resistant to high and low temperatures. I... |
