Internal Combustion Rail Profile Grinder
This machine is powered by the M165 two-stroke petrol engine imported from Spain. It is a small machine used for forming and grinding the rail head welding joints and surface repairs. It is suitable for rails of 43~75kg/m. The special diaphragm carburetor make sure the engine does not stall after turning 90°, and the output torque is stable without power attenuation, thus ensuring the precision of rail grinding.
Other supplier products
|
Internal Combustion Rail Drilling Machine |
This machine is an indispensable tool for railway maintenance, construction and emergency repair operations. It uses a hollow drill bit, fast clamp... |
|
NQG-5III Rail Cutting Machine |
NQG-5III Internal combustion rail cutting machine is suitable for cutting rails of 43kg/m~75kg/m. The quality of cutting section meets the requirem... |
|
Switch Rail Lateral Wear Gauge |
The switch rail lateral wear gauge is used to measure the switch rail lateral wear and descent height value of the switch rail ,it can be used for ... |
|
Frog and Switch Point Grinder |
The NCM-4.0 frog&switch point grinding machine is the most economical machine in the market for your turnout maintenance and repair, it can be ... |
|
Aluminum case for track gauge |
Aluminum case is used for packing the track gauge .
Different size: 1000mm ,1067mm,1435mm ,1676mm etc |
供应产品
Same products
|
36V智能锂电钢轨钻孔机 |
卖方: 842518 |
智能锂电钻孔机,采用恒功率的专利技术,确保了电机对扭矩输出的控制功能,加上3KW超大功率,让恒速钻孔轻松实现。既保证钻孔的快速,又防止操作者用力过猛对钻头和电机造成损伤。LED转速报警灯可以实时... |
|
内燃钢轨钻孔机 |
卖方: 842518 |
内燃钢轨钻孔机,是适用于铁路工务、工程部门钻制钢轨鱼尾板螺栓孔的专用机械。适合于对P65、P75钢轨的钻孔作业。它以小型汽油机为动力,经过专用减速器减速,带动钻杆旋转。采用手柄驱动齿轮、齿条实现... |
|
72V便携式锂电锯轨机 |
卖方: 842518 |
超强劲无刷直流电机,最大功率大于8KW,切割高效
60轨,切割时间小于90秒
整机13公斤,超轻设计。电池7公斤,搬运和充电时,可从整机上拆分下来。
超长续航,一次充电,可以切割6个头(6... |
|
K1270切轨机 |
卖方: 842518 |
具有切割精度高,切割速度快,可以左右切割的特点。 独特的镁铝合金锯片罩,重量轻,切割钢轨后无铁屑残留,延长了锯片罩的使用寿命。 |
|
内燃切轨机 |
卖方: 842518 |
内燃切轨机是我公司根据现场施工单位实际要求,最大限度减轻重量,提高切割速度,新一代内燃切轨机;是铁路工务.桥梁.线路大修等部门理想的钢轨切割工具。惯用,线路的维修。抢修。特别是无电源的地段和区间... |