.

Marine rubber buffer docking pneumatic fender factory

Introduction of marine rubber buffer docking pneumatic fender price Yokohama fender which is made of synthetic-cord-reinforced rubber sheet with compressed air inside to enable it to float on the water and work as a shock absorb between two ships (ship-to-ship), or between ships and berthing structures when they come alongside each other on the water.

Features of marine rubber buffer docking pneumatic fender price

1) High energy absorption
The amount of energy absorbed is the main technical performance indicators fender instruments. With the ship's tonnage growth, berthing operations, ship collision energy contact quay or other ships also doubled. Huge collision energy must rely on the contact area on the fender and enough to absorb sufficient deformation. Fenders use compressed air as the buffer medium to absorb ship impact energy and have good elasticity.

2) Ultra low back pressure
The inside air of yokohama fenders is low pressure gas, the internal pressure increase is very limited during compression deformation. Due to the large contact area, unit pressure acting on the ship hull surface is very low, compared with other fender instruments, is not the common low back pressure.

3) Inclined contact, good adaptability
Ship must have certain angle which have the possibility of contacting the side of the shore. As the inclined interface of yokohama fender, its adaptability is much higher than other fender.

4)Floating performance is good, not subject to tidal influence, fender can be maintained in the ideal level
yokohama fenders floating on the water surface (more than 50% of the volume), along with the change of position is not relative to the tidal fluctuation. Especially the ship as the waves rolling, cylindrical inflatable fenders with rolling, the friction force is very small. So it will not damage the coating surface of the hull, and also decrease the moving.

5) Both end fender flange produced by special materials, acid and alkali resistance, oxidation resistance, not easy to rust.

6)Florescence yokohama fenders install easily and widely used in a variety of ships, large dock and a large variety of tidal dock.



在线联系供应商

至: 青岛丰一顺橡胶制品有限公司
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Launching lifting ship and marine airbag
Launching lifting ship and marine airbag Marine airbag Ship and marine airbag Ship and marine airbag is well known as ship launching airbag,marine airbag,rubber airbag,la...
Heavy duty boat ship moving airbag for lifting salvage
Heavy duty boat ship moving airbag for lifting salvage Ship moving airbag Advantages of ship moving airbag 1.Qingdao Florescence specializes in the production of ship moving airbag sin...
Ship/boat/vessel Inflatable Marine Natural Rubber Air Bag
Ship/boat/vessel Inflatable Marine Natural Rubber Air Bag Marine air bag 4 layers marine air bag 6 layers marine air bag 8layers marine air bag ...
Ship Launching Inflatable Marine Rubber Airbag To America
Ship Launching Inflatable Marine Rubber Airbag To America Launching airbag Application ofShip Launching Inflatable Marine Rubber Airbag To America ...
Marine mooring 50KPA ship floating pneumatic rubber fender
Marine mooring 50KPA ship floating pneumatic rubber fender Introduction ofMarine mooring 50KPA ship floating pneumatic rubber fender Ship floating pneumatic rubber fenders are ideal for permane...
供应产品

Same products

Marine delivery valveNVD36
Marine delivery valveNVD36 卖方: 泗洪唐尼发动机配件有限公司 Our factory sell marine nozzle, plunger,injector,valve,etc,which used for the vessel and agricult...
Marine plunger D67 (20mm)  NVD48 (20mm)
Marine plunger D67 (20mm) NVD48 (20mm) 卖方: 泗洪唐尼发动机配件有限公司 Our factory sell marine nozzle, plunger,injector,valve,etc,which used for the vessel and agricult...
Marine nozzle 7×0.3×130,7×0.3×140,7×0.3×170
Marine nozzle 7×0.3×130,7×0.3×140,7×0.3×170 卖方: 泗洪唐尼发动机配件有限公司 Marine nozzle (we can process the bore diameter from 4mm to 8mm ) Mobile & />5×0.3&ti...
Marine nozzle7×0.25×140
Marine nozzle7×0.25×140 卖方: 泗洪唐尼发动机配件有限公司 5×0.3×130 SUIT ENGINE: NVD-26-A3 5×0.35×130 SUIT ENGINE: NVD-26-A 5×...
BV certificated cylindrical pneumatic floating fender for dock
BV certificated cylindrical pneumatic floating fender for dock 卖方: 青岛丰一顺橡胶制品有限公司 BV certificated cylindrical pneumatic floating fender for dock ♦ Qingdao Florescence...