Incline Impact Tester

The Incline Impact Tester is designed to evaluate the impact resistance of products, packaging, and transport systems under controlled oblique loading conditions. It simulates real-world drop, collision, and tilt scenarios, providing quantitative assessment of structural integrity, energy absorption, and deformation for a wide range of consumer, industrial, and automotive components.

Application

(1) Packaging drop and transport impact testing

(2) Consumer goods durability evaluation under oblique impact

(3) Industrial machinery and palletized freight crash simulation

(4) Automotive component oblique load testing

(5) Quality control in logistics and manufacturing

(6) Material and design validation for R&D laboratories

Standards

(1) ASTM D7748 – Impact resistance testing of packaging and transport systems

(2) ISO 13355 – Automotive component durability evaluation under oblique load conditions

(3) ISTA 3E – Simulates truck collision scenarios for palletized freight testing

Features

(1) Rapid Precision Deployment: Pneumatic positioning system with <0.1 mm repeatability and tool-free impact speed adjustment.

(2) Modular Impact Configuration: Multiple load capacities (1,000–10,000 lbs) and scalable collision surfaces for various product sizes.

(3) Advanced Data Acquisition: High-speed 4-channel TLP system with laser velocimetry for peak force and deformation capture.

(4) Ergonomic Workflow: Low-profile sled and self-centering guides for repeatable impact angles and easy specimen handling.

(5) Industrial Durability: Hardened steel AR500-grade collision plates and IP67-rated sealed drive system for long-term reliability.

(6) Safety Systems: Enclosure interlocks, laser safety curtains, and overload protection to prevent operator hazards.

Parameters

Model	Load Capacity	Collision Surface	Sled Size	Max Speed	Simulated Drop Height
Ⅱ1000	1,000 lbs	60” × 60”	48” × 48”	8 ft/sec	18”
Ⅱ2000	2,000 lbs	72” × 72”	60” × 60”	8 ft/sec	18”
Ⅱ4000	4,000 lbs	84” × 84”	72” × 72”	8 ft/sec	18”
Ⅱ6000	6,000 lbs	84” × 84”	72” × 72”	8 ft/sec	18”
Ⅱ8000	8,000 lbs	84” × 84”	72” × 72”	8 ft/sec	18”
Ⅱ10000	10,000 lbs	96” × 96”	84” × 84”	8 ft/sec	18”

Accessories

(1) Collision Surface Upgrades: AR600 steel targets, replaceable rubber bumpers

(2) Software Add-Ons: CrashView Pro™ (high-speed video up to 10,000 fps), Cloud Safety remote monitoring

(3) Calibration Services: Annual NVLAP-accredited velocity calibration, accelerometer cross-axis testing

(4) Safety Upgrades: Explosion-proof enclosure, seismic-rated anchoring system

(5) Consumables: High-temperature lubricant for linear bearings, replacement laser sensor covers

Test Procedures

(1) Secure the specimen onto the sled or collision surface using appropriate clamps.

(2) Select load capacity, impact speed, and oblique angle via touchscreen interface.

(3) Initiate pneumatic launcher and monitor real-time force, velocity, and deformation data.

(4) Capture post-impact data and high-speed video for analysis.

(5) Repeat for additional test conditions or specimens as required.

Maintenance Information

(1) Inspect pneumatic components, sled rails, and collision plates regularly for wear.

(2) Clean laser sensors, sled guides, and collision surfaces after each test series.

(3) Verify calibration of velocimetry and accelerometer sensors at scheduled intervals.

(4) Lubricate moving components with high-temperature lubricant.

(5) Store in a dry environment to prevent corrosion and maintain measurement accuracy.

Other supplier products

	Electric bicycle lighting device testing machine	An electric bicycle lighting device testing machine is a piece of equipment used to test the lighting devices of electric bicycles, ensuring they m...
	Medical needle toughness tester	The Medical Needle Toughness Tester is designed to evaluate the mechanical strength and flexibility of medical needles under bending stress. It fea...
	Helmets Designated Protection Areas Tester	The helmet designated protection area testing device is a piece of equipment used to mark test points and lines on helmets, and is suitable for all...
	In-situ expansion analysis system	The In-situ Expansion Analysis System is designed for high-precision measurement of dimensional and volumetric changes in electrochemical cells and...
	Scrub Abrasion Tester	T107 Scrubbing Tester, It is suitable for various abrasion and wet scrubbing tests, which is commonly used in scrubbing resistance tests for interi...

All supplier products

Same products

	Air Permeability Tester STD- F8	Seller: Standard International Group (HK) Limited	The Air Permeability Tester is designed to quickly and accurately measure the breathability and p...
	Surface Performance Tester STD-FB4 - A	Seller: Standard International Group (HK) Limited	Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti...
	Compression Tester STD - FB3 - A	Seller: Standard International Group (HK) Limited	TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar...
	Single - Strand Bending Tester STD - FB2 - SH	Seller: Standard International Group (HK) Limited	Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ...
	Bending Tester STD- FB2 - S	Seller: Standard International Group (HK) Limited	Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig...