Helmet Surface Friction Testing Machine
A helmet surface friction testing machine is a device used to test the frictional force between the surface of a helmet and other objects. Its main purpose is to ensure that the helmet has sufficient friction during use to prevent slipping or falling off, thereby improving safety.
Application
The Helmet Surface Friction Tester presses a helmet onto a movable fixture with a certain force. The surface of the fixture is attached with sandpaper of the grain size specified in the standard. Then, the test helmet is moved across the surface of the sandpaper at a certain speed, so as to evaluate the abrasion - resistance performance of the helmet.
Standards
GB 811-2022:Helmets for motorcycle and electric bicycle users
Features
1、PLC touch screen control
2、Horizontally oriented carrier with exchangeable mounting of sandpaper and cutting knives
3、Head type can be rotated 360
4、With professional speed measuring tooling
Parameters
| Item | Detail |
|---|---|
| Friction sandpaper | 300mm - 303mm long, grade 80 aluminum oxide coated sandpaper |
| Steel cutter | 6mm high, 25mm wide, with the top edge chamfered at a radius of 1mm |
| Impact weights | 15kg - 15.5kg |
| Fall height of the weight | 0 - 1000mm |
| Pre-loaded weight | 400N - 410N |
| Sensor range | 0 - 120mm |
| Instrument power supply | 220V 50HZ |
Accessoriess
Abrasive sandpaper
Steel cutting blade
Movable clamp
Horizontal guide rail and support frame, etc.
Test Procedures
The helmet is pressed against a movable clamp with a certain force.
The surface of the clamp is covered with sandpaper of a standard specified grit size.
The helmet is then moved across the sandpaper surface at a certain speed.
The friction resistance of the helmet is evaluated by observing and measuring the frictional force.
These steps ensure that the helmet has sufficient friction during use to prevent slipping or falling off, thereby improving safety.
Send product request
Other supplier products
 |
Battery Adiabatic Calorimeter | Battery adiabatic calorimeters play a crucial role in battery research and development, providing essential thermodynamic data for safety assessmen... |
 |
Vertical flame test chamber | Introduction The Vertical Flammability Chamber, designed for American Standards, measures the vertical flame spread for children's sleepwear, fabr... |
 |
Textile Thermal Insulation Property Tester | Standard GB/T 41560-2022 (China): Specifies thermal resistance testing protocols for protective clothing and industrial fabrics. BS 6526:1998 (UK... |
 |
Timken Test Machine | The extreme pressure friction testing machine mainly consists of a main frame, a spindle transmission system, a test force loading mechanism, a lub... |
 |
Dental Implants Fatigue Tester | Standard ISO 14801:2016: Specifies dynamic fatigue testing protocols for endosseous dental implants, including load ratios, frequency, and failure... |
Same products
 |
Gas Oxidizing Property Tester | Seller: Standard International Group (HK) Limited | Product Description Conforms to ISO 10156-2010 “Gases and Gas Mixtures Selection of Cylind... |
 |
Battery Powder Compaction Density Measurement System | Seller: Standard International Group (HK) Limited | The Battery Powder Compaction Density Measurement System is a precision testing system designed... |
 |
Battery Powder resistance tester | Seller: Standard International Group (HK) Limited | The Powder Resistivity Meter is a precision testing system designed to measure electrical resisti... |
 |
KES-SESRU surface roughness/friction tester | Seller: Standard International Group (HK) Limited | TheRoughness/Friction Tester analyzes hand movements-particularly, strokes-performed by artisans ... |
 |
Air Permeability Tester STD- F8 | Seller: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
