Oil Level Sensors
The oil sensor level is used to accurately measure the oil level, oil temperature and engine oil state, is installed in the oil pan of the engine. By measuring the oil level, low oil levels and consequent engine damage can be avoided. By measuring the oil state, it is possible to avoid engine damage caused by poor oil quality.
Key Features of Oil Level Switch Sensors
Flexible and concise, high reliability.
Powerful, small and good versatility.
No wearing parts, good stability, no need for regular maintenance and calibration.
How To Test Oil Level Sensors / Oil Sensors?
1. Power supply detection. Use a digital multimeter DC 20V to detect terminal 1 of the oil level sensor. When the ignition switch is turned on, the voltage of its power supply terminal should be the battery voltage.
2. Ground wire detection. Check the resistance between the No. 2 wire and the ground wire, the normal value should be 0Ω, otherwise the ground wire is abnormal.
3. Signal line reference voltage detection. The signal voltage of line 3 should be detected within the range of 9.8~10.5V, and the measured voltage value should basically not change at idle speed.
4. Decoder detection. Use V.A.G1551 to query the fault code. If there is a problem with the oil level switch sensor, oil level thermal sensor itself or the line, fault code 00562 will appear.
5. Waveform detection. Using an oscilloscope to analyze the waveform of the signal at the output end of the oil level transmitter sensor can further determine the signal characteristics of the sensor. The signal is a pulsed rectangular square wave signal.
If you want to know more about oil level sensor price, please visit our website.
We can offer sorts of auto spares sale, if you have needs to buy high quality auto spares, please leave us a message.
Other supplier products
|
|
Headlight Bulbs |
HID Car Headlight Bulbs also named Xenon Bulbs High Brightness. 35W xenon lamp can produce 3200 lumens of bright light. Wide color temperature ra... |
|
|
Rear Wiper Blades |
The rear wiper blade armis the wiper of the rear windshield of the vehicle, which is usually equipped on SUVs, MPVs, hatchbacks. The influence of h... |
|
|
Car Knock Sensors |
The car aftermarket knock sensoris an AC signal generator, which can detect the speed and position of the rotating shaft, vibration or mechanical p... |
|
|
Fuel Pump Assemblies |
EFI fuel pump assembliesis a combination of a electric fuel pump, a fuel gauge sending unit, a pressure regulator valve, a fuel tank pressure senso... |
|
|
Rail Ignition Coils |
The ignition coil railis directly inserted into the cylinder head, including two parts, the head and the rod, which are connected together. The hea... |
All supplier products
Same products
