KRD15 Pneumatic Horizontal Shock Response Spectrum Test System
KRD15 series is the state-of-the-art shock response spectrum tester that adopts compressed gas energy to provide impact energy, push the shock hammer to impact the resonance plate, and generate high energy shock. Comparing to traditional pendulum shock response spectrum tester, this machine has the advantages of high energy, stable performance, high reliability, good repeatability, easy adjustment, safety and environmental protection. It is mainly applied in the industries of aerospace, aviation and ships.
l The system uses pneumatic energy storage to drive the impact hammer, with large driving force, fast response speed and reliable structure;
l Adjust the driving shock energy by adjusting the air pressure, which is convenient to operate and high in efficiency.
l Special designed base for the response spectrum, which can raise the installation position of the response board, convenient for the user to install the test piece and adjust the gasket. In addition, the rigidity of the installation position of the response board is greatly enhanced, which makes it better fixed to the ground foundation and withstands larger Impact load.
l A two-level safety cut-out is designed to fully protect the safety of operators.
l The operating software has the functions of shock response spectrum tester control, shock data collection, and response spectrum analysis.
Technical Specifications
|
Model Parameters |
KRD15－50 |
KRD15－100 |
KRD15－200 |
KRD15－500 |
KRD15－1000 |
|
Load (kg) |
50 |
100 |
200 |
500 |
1000 |
|
Table Size (mm) |
500×500 |
600×600 |
800×800 |
1000×1000 |
1200×1200 |
|
Response Frequency Range (Hz) |
10-10000 |
||||
|
Acceleration (g) |
15000 |
12000 |
10000 |
8000 |
6000 |
|
Gradient of Rising Stage (dB/Otc) |
6～9 |
||||
|
Tolerance Range (±Db) |
6～9 |
||||
|
Overall Dimension (mm) |
3700×1200×850 |
4000×1200×850 |
4300×1440×850 |
4500×1640×850 |
4700×1840×850 |
|
Power |
AC220V ± 10%，50Hz |
||||
|
Weight (kg) |
3000 |
3500 |
3600 |
3800 |
4000 |
|
Working Environment |
Temperature range 0 ~ 40℃; Humidity ≤ 80% (25℃), non-condense |
||||
Send product request
Other supplier products
 |
KRD61 6-DOF Simulation Table | KRD61 series 6-DOF simulation table is a closed-loop servo simulation platform consisting of six servo actuators and six sets of dedicated hinges c... |
 |
Packaging Compression Test Machine | KRD101 Series Packaging Compression Tester is designed to evaluate the compressive strength of packaging in order to prevent the product from defor... |
 |
Constant Acceleration Tester (Box Type) | KRD30 series constant acceleration test machine is used to evaluate when components, equipment and other electrical and electronic products are sub... |
 |
Hydraulic Vertical Shock Test Equipment | KRD10 series full-automatic hydraulic shock test system is used to measure and determine the impact resistance of products or packaging, and to eva... |
 |
Dual-environment constant acceleration tester | KRD32 series non-standard centrifugal constant acceleration testing machine is test equipment for military products to simulate dynamic centrifugal... |
Same products
 |
Plastic Smoke Density Tester F313 | Seller: Standard International Group (HK) Limited | The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ... |
 |
Xenon Test Chamber | Seller: Standard International Group (HK) Limited | Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli... |
 |
Single Cable Vertical Flame Tester | Seller: Qinsun Instruments Co., LTD | Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ... |
 |
Safety Helmet Flammability Tester | Seller: Qinsun Instruments Co., LTD | Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda... |
 |
Furniture flammability tester | Seller: Qinsun Instruments Co., LTD | Product details Furniture flammability tester is mainly used to test the combustion performance ... |
