Helmet Xenon Aging Tester

Standards

GB/T2014-9-19. ISO 4892

ASTM G151. G154. D4329

d4587、d4799、sae j2020

Xenon lamp aging test box structure

1. the box is molded by CNC machine tool processing, beautiful and generous shape, the lid is two-way flip type, easy to operate.

2. the inner liner is made of imported stainless steel plate, the outer liner is sprayed with A3 steel plate, which increases the appearance of texture and cleanliness.

3. heating mode for the inner liner sink heating, warming fast temperature distribution.

4、Drainage system using back to the vortex type and U-type sedimentation device drainage, convenient for users to clean.

Helmet xenon lamp aging test chamber applications

Xenon lamp aging test chamber, also known as xenon arc lamp aging test chamber, the application of a wide range of industries, such as: coatings ink paints, resins, plastics, printing and packaging, adhesives, automotive and motorcycle industries, cosmetics, metals, electronics, electroplating, pharmaceuticals, etc. Xenon arc lamp aging test chamber can quickly and realistically reproduces the sunlight, rain, dew on the materials of the damage: it takes only a few days or a few weeks Q8 to reproduce outdoor need months or years To produce damage: including fading, discoloration, brightness loss, chalking, cracking, blurring, embrittlement, strength loss and oxidation.

Xenon lamp aging test chamber features

1. the specimen installation thickness can be adjusted, the specimen is fast and easy to press and install.

2. the upward rotating door does not hinder the user to operate the equipment, only occupies a small space.

3. unique condensation system using ordinary tap water can meet the requirements.

4、Water heater is under the container, not immersed in water, long life, easy maintenance.

5、Water level control is placed on the outside of the UV box, easy to monitor.

6. the equipment has casters, easy to move, casters are standard accessories.

8、Computer programming is convenient, misoperation and fault automatic alarm. Light intensity programmable

9. there amplitude illumination calibrator calibration can extend the lamp life (longer than 1600 hours).

9. there are Chinese and English manual, easy to access.

10. divided into ordinary, light amplitude illumination control type, spray type.

Xenon lamp aging test chamber technical parameters

1. the condensing device simulates the effect of outdoor humidity, the humidity can be achieved

2. there is an electronic eye irradiance control system

3. through the blackboard temperature sensor to measure the temperature accurately, can be repeated to reproduce the test results

4、Humidity, condensation, water spray can cycle continuous test

5. amplitude illuminance with CR-10 calibrator traceability and automatic calibration procedures

6. the number of test samples: 75mm × 300mm samples 24 75mm × 150mm samples 48 pieces

Xenon lamp aging test chamber control system

1. light and condensation of independent control time and alternate cycle control time can be set arbitrarily within 999h.

2、French “Schneider” components, Philips rectifier and starter (to ensure that each boot can light up the ultraviolet lamp).

3、Using black aluminum plate to connect the temperature sensor, using the blackboard temperature, instrument control heating, temperature is more stable.

4、Radiometer probe adopts fixed type, without loading and unloading every time.

5. radiation using high-precision display and measurement of ultraviolet irradiance meter.

6. light and condensation can be duly controlled can alternate cycle control.

Other supplier products

	Deval abrasion tester	Product Introduction: Diphal abrasion testing machine is mainly used for stone abrasion rate test, suitable for European standards, French standar...
	Micro Rapid Closed Cup Flash Point Tester	Reference Standards： SN/T 3077.1、SN/T 3077.2. SH/T 0768. DL/T 1354. ASTM D93、ASTM D6450、ASTM D3828、ASTM D7094、ASTM D7236、ASTM D56、ASTM D56、ASTM...
	Liquid Spontaneous ignition point tester	Product Description complies with GB/T 21860-2008 “Test Method for Autoignition Temperature of Liquid Chemicals” and ASTM E “Tes...
	Medical Face Mask Synthetic Blood Penetration meter	Applicable Standards: GB 19083-2010 YY/T 0691-2008 YY 0469-2011 ISO 22609 ASTM F1862-07 Features: 1. Mask fixture is metal human head mold, ...
	Fire retardant coating test machine	Product details： Fire retardant coating test machineis composed of two parts: the main control box and the burning box. It is used in the laborato...

All supplier products

Same products

	FH-77 Dissolved hydrogen meter	Seller: Kelilong Electron Co.,Ltd	Pen type dissolved hydrogen detector / dissolved hydrogen meter: used to measure the dissolved hy...
	Xenon Arc Weather Ometer	Seller: Standard International Group (HK) Limited	Get a quote： Whats/App: +86 181 0160 0864 SI4000Xenon Arc Weather Ometer utilizes a xenon lamp ...
	Xenotest | Light Fastness Tester Si220 (SunTest)	Seller: Standard International Group (HK) Limited	Get a quote： Whats/App:+86 180 0160 0864 A Light Fastness Tester, or Xenon Tester, Accelerated ...
	Ozone Aging Chamber	Seller: Standard International Group (HK) Limited	Get a quote： Whats/App:+86 156 1874 6768 The Ozone Aging Chamber is a precision testing instrum...
	Plastic Smoke Density Tester F313	Seller: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com The F313 Plastic Smoke Density Tester is ...