Sloped Impact Tester
Standard
- ASTM D7748: Impact resistance testing of packaging and transport systems.
- ISO 13355: Automotive component durability evaluation under oblique load conditions.
- ISTA 3E: Simulates truck collision scenarios for palletized freight testing.
Product Advantages
1. Rapid Precision Deployment
- Pneumatic Positioning: Sub-0.1mm repeatability for crash velocity calibration.
- Tool-Free Adjustment: Dial-in impact speeds from 2–12 ft/sec (0.6–3.7 m/s).
2. Modular Impact Configuration
- 6 Load Capacities: 1,000–10,000 lbs (454–4,536 kg) for consumer goods to industrial machinery.
- Scalable Collision Surfaces: Up to 96” × 96” (2.4m × 2.4m) for full-scale product testing.
3. Advanced Data Acquisition
- 4-Channel TLP System: 100 kHz sampling rate captures peak G-forces and deformation.
- Bi-Directional Velocimetry: 1,000VM laser sensor with 0.01 ft/sec resolution.
4. Ergonomic Workflow
- Low-Profile Sled: 8” ground clearance for forklift-free specimen loading.
- Self-Centering Guides: Automatic alignment for repeatable impact angles.
5. Industrial Durability
- Hardened Steel Targets: AR500-grade collision plates resist deformation.
- Sealed Drive System: IP67-rated motor for dusty/wet environments.
Product Features
- Impact System:
- Pneumatic Launcher: 0–8 ft/sec (0–2.4 m/s) in 0.1 ft/sec increments.
- Fail-Safe Braking: Hydraulic deceleration system with 10g emergency stop.
- Data Acquisition:
- TLP Pro Software: Real-time force-time curves and energy dissipation analysis.
- Unit Conversion: Toggle between imperial (lbs, ft/sec) and metric (kg, m/s).
- Safety Systems:
- Enclosure interlocks with laser safety curtains.
- Overload protection at 110% of rated capacity.
- Sled Design:
- Reinforced steel frame with replaceable aluminum impact face.
- Adjustable height collars for 0°–15° oblique angles.
- Mobility:
- Forklift pockets and lifting eyes for warehouse relocation.
- Collapsible guardrails for narrow-aisle storage.
Technical Parameters
| Model | Load Capacity | Collision Surface | Sled Size | Max. Speed | Simulated Drop Height |
|---|---|---|---|---|---|
| Ⅱ1000 | 1,000 lbs | 60” × 60” | 48” × 48” | 8 ft/sec | 18” |
| Ⅱ2000 | 2,000 lbs | 72” × 72” | 60” × 60” | 8 ft/sec | 18” |
| Ⅱ4000 | 4,000 lbs | 84” × 84” | 72” × 72” | 8 ft/sec | 18” |
| Ⅱ6000 | 6,000 lbs | 84” × 84” | 72” × 72” | 8 ft/sec | 18” |
| Ⅱ8000 | 8,000 lbs | 84” × 84” | 72” × 72” | 8 ft/sec | 18” |
| Ⅱ10000 | 10,000 lbs | 96” × 96” | 84” × 84” | 8 ft/sec | 18” |
Accessories & Options
- Collision Surface Upgrades:
- AR600 steel targets for high-abrasion testing.
- Replaceable rubber bumpers for soft-impact simulation.
- Software Add-Ons:
- CrashView Pro™: High-speed video synchronization (up to 10,000 fps).
- Cloud Safety: Remote monitoring for global compliance teams.
Send product request
Other supplier products
 |
Safety Helmet Roll-off Testing Equipment | The safety helmet retention test equipment is a device used to evaluate the stability of a helmet's fit when subjected to impact. By simulating the... |
 |
Minimum Ignition Temperature (MIT) – Dust Cloud Tester，ASTM dust ignition tester | Dust Cloud Minimum Ignition Temperature Tester is mainly used to assess the explosiveness of dust in the production and processing places such as a... |
 |
Femoral Stem Neck Prostheses Fatigue Tester | Standard YY/T 0809.6 (China): Specifies neck fatigue testing for femoral stems in partial/total hip arthroplasty. ISO 7206-6 (International): Def... |
 |
High temperature vacum friction & wear tester | The working principle of a high-temperature vacuum friction and wear testing machine is to simulate the friction and wear behavior of materials und... |
 |
Automatic Reaction Calorimeter | Standards GB 51283 GB/T 22232 GB/T 17802 SN/T 3078.1 Product Features 1. It offers three calorimetry methods: heat - flow, power - compensati... |
Same products
 |
Plastic Smoke Density Tester F313 | Seller: Standard International Group (HK) Limited | The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ... |
 |
Xenon Test Chamber | Seller: Standard International Group (HK) Limited | Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli... |
 |
Single Cable Vertical Flame Tester | Seller: Qinsun Instruments Co., LTD | Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ... |
 |
Safety Helmet Flammability Tester | Seller: Qinsun Instruments Co., LTD | Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda... |
 |
Furniture flammability tester | Seller: Qinsun Instruments Co., LTD | Product details Furniture flammability tester is mainly used to test the combustion performance ... |
