Titanium carbide guide wheel - for industrial use
Hard alloy titanium carbide guide wheels are key guiding components in the production of wire and tube materials. They are made by powder metallurgy sintering of high-purity titanium carbide and cobalt binder phases, with a surface hardness as high as HRC88 and wear resistance more than 50 times that of steel guide wheels. The roundness error is controlled within 0.002mm to ensure smooth operation of the wire during high-speed drawing (up to 100m/s), avoiding jitter or offset. In the production of stainless steel wire, the use of this guide wheel can reduce the surface roughness of the steel wire from Ra1.6μm to Ra0.4μm, significantly improving product quality. Compared with ceramic guide wheels, this type of guide wheel has better toughness and is less likely to break due to minor collisions, reducing the frequency of replacement. Its service life is 2 to 3 times that of ceramic guide wheels. In the production of steel cord, a set of guide wheels can produce over 1,000 tons of cord, while ceramic guide wheels can only produce 300 to 500 tons. The cost-performance advantage of guide wheels has enabled them to be widely used in the tire industry, helping to enhance the wear resistance and safety of tires.
Send product request
Other supplier products
 |
Titanium carbide guide wheels for alloy tube rolling | The installation holes of the guide wheel have high precision, and the fit clearance with the shaft can be controlled within 0.005-0.01mm, ensuring... |
 |
Reduce production costs of titanium carbide powder | Titanium carbide powder has high sintering activity and can be sintered densely at 1300-1500℃, which is 200-300℃ lower than the sintering temperatu... |
 |
The core material of metal ceramics is titanium carbide powder | Titanium carbide powder has excellent oxidation resistance. It is not prone to oxidation in the air below 600℃, and the oxidation rate at 800℃ is o... |
 |
Titanium carbide guide wheels with no scratch contamination on the surface | 硬质合金碳化钛导轮具有优异的抗冲击性能。当丝突然受力或断裂时，它们不易裂纹或变形，从而降低设备停机的风险。它具有优异的热传导性能，可以迅速散发摩擦产生的热量，使导轮的工作温度保持在80℃以内，防止丝因过热而退火。在弹簧钢丝的生产中，使用这种导轮可以将钢丝的直线度误差控制在0.5mm/m以内，从... |
 |
Titanium carbide rods in stock can be cut as needed | Compared with traditional high-speed steel bars, the cutting speed achievable with titanium carbide hard alloy round bars can be increased by 3 to ... |
