Titanium carbide guide wheel - for industrial use
Hard alloy titanium carbide guide wheels are key guiding components in the production of wire and tube materials. They are made by powder metallurgy sintering of high-purity titanium carbide and cobalt binder phases, with a surface hardness as high as HRC88 and wear resistance more than 50 times that of steel guide wheels. The roundness error is controlled within 0.002mm to ensure smooth operation of the wire during high-speed drawing (up to 100m/s), avoiding jitter or offset. In the production of stainless steel wire, the use of this guide wheel can reduce the surface roughness of the steel wire from Ra1.6μm to Ra0.4μm, significantly improving product quality. Compared with ceramic guide wheels, this type of guide wheel has better toughness and is less likely to break due to minor collisions, reducing the frequency of replacement. Its service life is 2 to 3 times that of ceramic guide wheels. In the production of steel cord, a set of guide wheels can produce over 1,000 tons of cord, while ceramic guide wheels can only produce 300 to 500 tons. The cost-performance advantage of guide wheels has enabled them to be widely used in the tire industry, helping to enhance the wear resistance and safety of tires.
在线联系供应商
Other supplier products
 |
High-performance chromium carbide powder | Chromium carbide powder is often irregular grayish-black particles with a particle size of 10-40μm, a purity of ≥98%, and a free carbon conte... |
 |
Titanium carbide rods suitable for large-scale processing | Compared with traditional high-speed steel bars, the cutting speed of hard alloy titanium carbide round bars can be increased by 3 to 5 times, whic... |
 |
Carbonitride powder for plastic modification | The particle morphology of this powder can be controlled, and it can be made into spherical, nearly spherical or irregular shapes, meeting the requ... |
 |
Nano grade titanium carbide alloy round bar | 该圆棒的生产工艺极其严谨，从碳化钛粉末纯度的控制（纯度≥99.5%）到烧结温度的精确调控（约1500℃），每一个环节都影响着最终的性能。成品尺寸稳定性极佳，在-50℃至300℃的温度变化下，热膨胀系数仅为6×10-⁶/℃，远低于金属材料，确保了精密工具在不同环境下的精度。它广... |
 |
Laser resharpening treatment of carbide titanium carbide guide wheel | Carbide titanium carbide guide wheel is the key guiding parts in the production of wire and pipe, which is made of high purity titanium carbide and... |
Same products
 |
99.5% high-purity chromium carbide powder | 卖方: 株洲华斯盛高科材料有限公司 | Chromium carbide powder has excellent wetting properties and is firmly bonded to metal substrates... |
|
|
Carbonitride powder for plastic modification | 卖方: 株洲华斯盛高科材料有限公司 | The particle morphology of this powder can be controlled, and it can be made into spherical, near... |
 |
Titanium carbide hard alloy drive wheel accessory | 卖方: 株洲华斯盛高科材料有限公司 | This guide wheel is customizable with various groove geometries—including V-shaped, U-shape... |
 |
Industrial titanium carbide alloy drive wheels | 卖方: 株洲华斯盛高科材料有限公司 | This guide wheel can be customized with various slot shapes according to the specifications of wi... |
 |
Wear-resistant steel-bonded hard alloy round bar | 卖方: 株洲华斯盛高科材料有限公司 | Titanium carbide (TiC)-based cemented carbide round rods exhibit exceptional electrical conductiv... |
