Titanium carbide hard alloy drive wheel accessory
This guide wheel is customizable with various groove geometries—including V-shaped, U-shaped, and semi-circular profiles—tailored to the dimensional and mechanical specifications of wire or tubular materials, thereby accommodating diverse production requirements. Following precision surface polishing, the wheel achieves a surface roughness of Ra 0.01 μm, significantly minimizing friction-induced surface damage to wires and enhancing the tensile strength of metallic wires by up to 10%. In automotive brake line manufacturing, the wheel’s high-precision guidance ensures consistent tension control throughout the drawing process, mitigating risks of in-service failure due to localized stress concentration or premature fracture. Dynamic balance is certified to ISO 1940–1 Grade G0.4, with vibration amplitude remaining below 0.01 mm even at elevated rotational speeds—effectively suppressing equipment vibration and associated acoustic noise, thereby improving occupational safety and workshop environmental conditions. Chemically inert under standard operating conditions, the wheel material exhibits no adverse reactivity with common metal wire substrates, eliminating risks of surface contamination, discoloration, or interfacial degradation. Particularly in precious metal wire processing (e.g., gold and silver wires), its ultra-clean, non-adhesive surface prevents particulate shedding and material loss, contributing directly to yield improvement and cost reduction.
Send product request
Other supplier products
 |
Titanium carbide powder with excellent thermal stability | Titanium carbide powder has high sintering activity and can be sintered densely at 1300-1500℃, which is 200-300℃ lower than the sintering temperatu... |
 |
Customized wear-resistant titanium carbide guide wheels | The guide wheel surface can be customized with specialized treatments to meet specific application requirements. For example, application of a diam... |
 |
Special for titanium carbide hard guide wheel transmission | The surface of the guide wheel can be specially treated as required. For instance, after being sprayed with a diamond coating, its wear resistance ... |
 |
Nano titanium carbide (TiC) has a high specific surface area | Titanium carbide powder has high sintering activity and can be sintered densely at 1300-1500℃, which is 200-300℃ lower than the sintering temperatu... |
 |
Titanium carbide rods - precision parts | The manufacturing process for this titanium carbide (TiC) round bar adheres to stringent quality control protocols. Starting from the raw material ... |
