Automotive Comfort Air Conditioning Dummy Test System
Applicable standards：
ISO related standards, such asISO 14505-2, which provide test methods and evaluation indicators for thermal comfort.
Berkeley Zhang evaluation model: This model is applicable to the physiological characteristics of Chinese human body, and evaluates human thermal sensation and comfort in the non-uniform and transient environment of automobiles.
Main parameters：
Dummy size:
The design is based on theChinese male 50th percentile human body sizeand characteristics to simulate the thermal comfort of the real human body.
Dummy material:
Usually lightweight and durable materials, such as fiberglass, are used to ensure that long-term use in high and low temperature and high humidity environments will not fade and rust.
Joint connection:
The dummy realizes joint connection in the neck, shoulder, elbow, wrist, waist, knee and ankle, and can realize flexible adjustment of various positions to simulate the sitting position and movement of the real human body.
Sensor configuration:
A number of sensors, such as temperature sensor, humidity sensor and heat radiation sensor, are configured on the surface of the dummy to measure the climatic environment parameters in the cabin.
Communication method:
Wireless or wired communication connections can be used between the dummy and the master controller to achieve real-time data transmission and monitoring.
Main controller functions:
Each master controller can support multiple sets of dummies to carry out the test simultaneously, improving the test efficiency.
Data can be displayed, stored and historical data queried in the form of alphanumeric, y-t charts and 3D cloud images, and exported locally in CSV format.
Range of test parameters:
Air temperature:The measurement range is usually between -20°C and +70°C, with calibration accuracy of ±1.0°C and display accuracy of ±0.1°C.
Air flow rate:The measurement range is usually between 0.1 and 5.0 m/s.
Relative humidity: The measurement range is usually between 0 and 95%RH （non-condensing）。
Radiant heat:The measurement range of the radiation sensor is near zero to >2,000 W/m².
Thermal comfort evaluation index:
The system supports a variety of thermal comfort evaluation indicators, such as PMV-PPD, EHT based on ISO 14505-2, local and global thermal sensation and thermal comfort based on Berkeley-Zhang theory, etc.
Send product request
Other supplier products
 |
Fogging Tester for Automotive & Textile Materials-QINSUN | Standard DIN 75201(Determination of the Evaporation Behavior of Materials in Motor Vehicles) ISO 6452(Rubber- or Plastics-Coated Fabrics &mdash... |
 |
Feeder | Peculiarity： Standard paint cup capacity ≤1L. Feeding design saves time and labor by eliminating back-and-forth pouring, enabling continuou... |
 |
Thermal and Water-vapour Resistance Tester-QINSUN | Introduction TheThermal and Water-vapour Resistance Testeris a special measurement device used for measurement of thermal and water-vapour resista... |
 |
Box Compression Tester | Standard operating mode: 1.Carton strength test: can measure the maximum pressure resistance and displacement of the box; 2. Carton setting tes... |
 |
IBC Reconditioning System Tote washer Tunnel | For the cleaning of IBC tote, manual cleaning is still the main method. The internal cleaning of IBC container has always been a difficulty and pai... |
Same products
 |
Seat Bumping and Creep Test Bench | Seller: Standard International Group (HK) Limited | This test bench is used for simulating the car seat bumping and creep situation when a car is run... |
 |
Automobile seat belt fixed point test bench | Seller: Standard International Group (HK) Limited | Applicable standards: National mandatory standards: GB 15083-2006"Automobile seats, seat fixtur... |
 |
Impact strength tester for car seat headrest | Seller: Standard International Group (HK) Limited | Applicable standards: GB 15083-2006 "Automobile seats, seat fixtures and headrest strength requi... |
 |
Impact strength tester for car seat launching headrest | Seller: Standard International Group (HK) Limited | Main parameters: Impact speed:The impact speed of the tester is usually between 25 and 30km/h, w... |
 |
Automobile Headrest Strength Tester | Seller: Standard International Group (HK) Limited | Applicable standards: GB 11550-2009"Automobile seat headrest strength requirements and test me... |
