Bearing Ring Crack and Hardness Combination Flaw Detector TQJC-02
During the processing of bearing rings, various defects are often generated on the surface or inside, andcrack testing equipmentoccupy a large proportion of all defects.
The cause of the cracks in the bearing rings is complicated. From the raw materials to the finished products of the ferrules, if the process is not proper, the cracks may be directly caused or the hidden cracks may be buried for the occurrence of the lap ring grinding cracks.
There are many ways to form cracks in bearing rings: Raw material defects include: cracks in raw materials and the effects of raw material defects on the grinding process.
Forging defects include forging cracks, effects of forged microstructure defects on the grinding process, and cutter cracks. There are also various heat treatment defects and the like. Therefore, crack detection and hardness testing are essential. BKNhas considerable experience in crack detection, and Bearing Ring Crack and Hardness Combination testing equipment is a perfect combination.
Bearing Ring Crack and Hardness Combination Flaw Detector TQJC-02 Brief Introduction
Detection process
Vibrating plate and string charging →hardness test→crack detection→automatic blanking
↓
Bad product sorting
Automatic charging —automatic detection—automatic sorting —automatic blanking
Crack sensitivity: a crack with a depth of ≥0.05 mm and a length of ≥1 mm extending inward from the surface of the ferrule; for a crack that has not extended to the surface inside the ferrule, when the thickness between the subcutaneous surface and the surface of the workpiece is ≤0.2 mm, the depth is ≥0.20 mm Cracks of length ≥ 1 mm can be detected.
Hardness sensitivity: Rockwell 1HRC ~ 2HRC (other parameters remain stable and consistent).
Nanjing BKN Automation System Co., Ltd. is an non destructive testing equipment manufacturersand has long been committed to the development and production of bearing hardness and crack eddy current screening equipment.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Magnetic Flux Leakage Testing Equipment | Electromagnetic detection is a very important non-destructive testing method and is widely used. Magnetic flux leakage is a magnetic method of nond... |
 |
Valve Tappet Eddy Current Flaw Detector QMTZET-04 | Tappet full automatic eddy current testingsystem is a full automatic crack hardness sorter that integrates light, electricity and machinery. The wh... |
 |
EDM Notch | An electric pulse is a pulse generated by electrons, and a pulse is a process of changing a voltage in a short time. Electropulsing is an unsteady ... |
 |
Connecting rod hardness vortex sorting machine LGYDFX-01 | The connecting rod hardness eddy current sortingmachinehas a calibration device, input compensation parameters, automatic/manual temperature compen... |
 |
EDM Notch | An electric pulse is a pulse generated by electrons, and a pulse is a process of changing a voltage in a short time. Electropulsing is an unsteady ... |
Похожие товары
 |
Microcrystalline wax used for rubber plastic processing and modification | Продавец: Syntop chemical Co.,Ltd. | Microcrystalline wax has a wide range of industrial applications, primarily in the areas of rubbe... |
 |
Microcrystalline wax 80A used for lubrication and demolding | Продавец: Syntop chemical Co.,Ltd. | The core industrial applications of microcrystalline wax 80A are primarily focused on rubber prot... |
 |
Tyvek Flat Roll Pouch | Продавец: Hopeway AMD | Tyvek Flat Roll Pouch is designed for professional sterilization packaging, offering clean handli... |
 |
Industrial Warehouse Ceiling Fans | Продавец: Hebei Windmax Power Technology Co., Ltd. | Industrial Warehouse Ceiling Fans Industrial Warehouse Ceiling Fans for Warehouses, Logisti... |
 |
HVLS Ceiling Fan for Railway Station | Продавец: Hebei Windmax Power Technology Co., Ltd. | HVLS Ceiling Fan for Railway Station for Railway Station All units are CE-certified, manufa... |
