.

Automotive Wires Liquid Resistance Tester

Standards:

  • ISO 6722-1:2011: International standard for road vehicle electrical cables, specifying liquid immersion resistance.
  • SAE J1128: Society of Automotive Engineers’ requirements for low-voltage battery cable performance in fuel/oil environments.
  • QC/T 730: Chinese automotive industry standard for wire/cable resistance to engine fluids.
  • JASO D611: Japanese automotive standard for hose/tube compatibility with gasoline, coolant, and brake fluids.

Main Parameters:

Test Oils:

1. Heat - retaining and heating oils (to be provided by the user): It is recommended to use oils with high boiling points and low volatility, such as transformer oil. If the test temperature is low, water can be used.

2. Test media (to be provided by the user): Gasoline, diesel, engine oil, alcohol, power steering fluid, automatic transmission fluid, engine coolant, battery acid, etc. Temperature: Ambient temperature ~ 250℃

Test set:

Circular quartz glass oil cup: diameter 100mm X 350mm Inner container volume: 400 X 450 X 450mm

Stirring:

Motor - driven stirring Volume (approximate): Dimensions: 800 X 560 X 850 (mm)

Material:

Inner and outer stainless steel

Temperature sensor:

Pt100 Weight (approximate): 100Kg

Power supply:

1 - phase AC380V 50Hz 7.5A Total power: 4KW


Send product request

To: Standard International Group (HK) Limited
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

Pumpability tester
Pumpability tester Product Introduction The pumpability tester is dedicated to accurately testing the pumpability of the shield tail seal grease used in shield const...
Cable extrusion tester
Cable extrusion tester Applicable Standards The tester adheres to international standards for cable mechanical testing, including: ISO 6722-1(Road vehicles – Elec...
Aerospace Fluorine-containing Wire Dynamic Cutting Through Tester
Aerospace Fluorine-containing Wire Dynamic Cutting Through Tester Applicable standards: GJB773B and other standards in the annex G dynamic cutting test requirements Applicable industry: This instrument is the...
AATCC Blue wool cloth
AATCC Blue wool cloth Standards & Applications The AATCC Test Method TM 16 "Colorfastness to Light" utilizes a series of dyed blue wool fabrics as calibration and...
Aircraft wire wear testing machine
Aircraft wire wear testing machine Applicable standards: GJB17.9. MIL-W-81381A, MIL-T-5438 and ISO R1220. 1491 and other standards Main parameters: 1. sand belt length counting ra...
All supplier products

Same products

Briefly describe the importance, core functionality and how to implement a hospital clock system solution
Briefly describe the importance, core functionality and how to implement a hospital clock system solution Seller: California Triangle In the healthcare industry, precise time synchronization is critical. Every second can be a matte...
Sand and Dust Test Chamber for Automotive Connectors
Sand and Dust Test Chamber for Automotive Connectors Seller: Standard International Group (HK) Limited Operating Conditions: Ambient temperature: 5°C~+28°C (average temperature within 24 hour...
Automotive Connector SO₂/H₂S Corrosion Test Chamber
Automotive Connector SO₂/H₂S Corrosion Test Chamber Seller: Standard International Group (HK) Limited Standards: GB/T 10587-89. GB/T 2423.9-93: Chinese national standards for sulfur dioxide corrosio...
Automotive Connectors Salt Spray Tester
Automotive Connectors Salt Spray Tester Seller: Standard International Group (HK) Limited Applicable Standards: Neutral Salt Spray (NSS) Tests: GB/T2423.17. ISO 3768/3769/3770. ASTM B117...
Air - tightness Testing Device for Automotive Connectors
Air - tightness Testing Device for Automotive Connectors Seller: Standard International Group (HK) Limited Main Functions: 1. Provide stable positive and negative pressures for testing the air - tightnes...