.

BKNET-0102 Welded Pipe Eddy Current Flaw Detector

Eddy current weld testing is the use of eddy current technology to test the welded pipe, this type of testing is based on the premise of lossless. At the same time, we need to be clear that the welded pipe is, in general, the steel pipe that we usually say, which is a welded steel pipe.

 

Eddy current weld testing is a non-destructive testing technique for detecting component defects by using the principle that the eddy current induced by the AC electromagnetic coil on the surface of the metal member encounters a defect. The oscillating current is generated in the conductive member by the excitation coil by the principle of electromagnetic induction, and the amount of change in the eddy current is measured by the detecting coil, thereby obtaining information on the component defect.

 

Eddy current weld testing is a non-destructive testing technique in which an alternating current electromagnetic coil induces eddy currents on the surface of a metal member. Eddy current weld inspection equipment is suitable for the detection of defects in conductive materials, including ferromagnetic and non-ferromagnetic metal materials.

 

BKNET-012 NDT weld testing equipment is used for on-line and off-line eddy current weld inspection of welded pipes. It has high sensitively to axial defects such as unwelded welding, dark spots and open cracks. In the production process, products are caused by welder failure. Slow and long-term injuries can be reliably detected.

BKNET-0102 Eddy Current Testing of Welds Flaw Detector performance 

 

Detection channel

 Double channel

Detection speed

1~500m/min(online)

Frequency range

100Hz-1MHz

Gain

0~99dB,step 0.1dB

Phase rotation

0-360 °step1 °

High pass

  1. ~650Hz

Low pass

1Hz~10000Hz

 

BKNET-0102 Weld Flaw Detector Features:

 

High precision end and end-to-tail signal removal

 

High precision real-time, delayed alarm output

 

Fast digital/analog electronic balance

 

Memory track delay blanking function  

 

Non-equal amplitude phase/amplitude alarm domain

 

Remote automatic help system

 

Synchronous alarm output for internal and external clock control

 

Why BKN NDT Testing Equipment

 

The technology of BKN originated from eddy current Laboratory of Institute of Materials, Nanjing University of Technology. At present, it is a leading high-tech enterprise specializing in developing types of NDT non-destructive testing instruments and equipment in China. The company is committed to the development of eddy current, ultrasonic, magnetic flux leakage and various ndt testing machine, holding independent research and development of a number of national patents.

 

 



在线联系供应商

至: Nanjing BKN Automation System Co.,LTD
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Eddy Current Testing Equipment
Eddy Current Testing Equipment Bokena is one of the most professional eddy current test equipment suppliersin China. We have been devoted to produce ect testing equipmentand ect ...
Eddy Current Testing Equipment
Eddy Current Testing Equipment Automatic EDM Notchis the ideal equipment for processing artificial defects of pipe rod standards in non-destructive testing work. The flaw detecto...
QTXET-01 Ball Studs Eddy Current Sorting Machine
QTXET-01 Ball Studs Eddy Current Sorting Machine There are two main types of ball studs: one is a combination of a spherical pin and an integral ball seat, and the other is a combination of a hemi...
Drill Pipe Magnetic Flux Leakage Detector MFL-308
Drill Pipe Magnetic Flux Leakage Detector MFL-308 Specifications: diameter Φ73 / Φ89 mm, length 9.6m or so Detection speed: 6-20 m / min Acceptance criteria: American Petroleum Instit...
Magnetic Flux Leakage Testing Equipment
Magnetic Flux Leakage Testing Equipment Electromagnetic detection is a very important non-destructive testing method and is widely used. Mag flux testingis a magnetic method of nondestruc...
供应产品

Same products

LM-79 Moving Detector Goniophotometer (Mirror Type C)
LM-79 Moving Detector Goniophotometer (Mirror Type C) 卖方: LISUN ELECTRONICS (SHANGHAI) CO.,LTD Measurement:Luminous Intensity Data, Photometric Data, Luminous Intensity Distribution, Zonal Lum...
HB Series
HB Series 卖方: Shanghai Kinglos Musical Instruments Co., Ltd. Personalized Violin Violin with carving flower, your personalized violin. Top: spruce. Back/Side...
Beginner Violin
Beginner Violin 卖方: Shanghai Kinglos Musical Instruments Co., Ltd. Good Beginner Violin Face material: Solid Spruce Back / Side: Maple Fingerboard material: ...
Advance Series
Advance Series 卖方: Shanghai Kinglos Musical Instruments Co., Ltd. Professional Violin Professional performance violin with high cost performance. Maple texture...
Acoustic Violin
Acoustic Violin 卖方: Shanghai Kinglos Musical Instruments Co., Ltd. The semi acoustic violinproduced by kinglos have good quality, many varieties and complete specif...