Computer controlled memory impact testing machine

Product Introduction:

Computer controlled memory impact testing machine is mainly used for hard plastics, reinforced nylon, glass steel, ceramics, cast stone, electrical insulation materials and other non-metallic materials impact toughness determination. The testing machine is an ideal test equipment for chemical industry, scientific research units, colleges and universities, quality testing departments, professional manufacturers laboratories and other units. It is a testing instrument with simple structure, convenient operation and accurate and reliable data.

Meet the criteria:

1.JB/T 8762-1998 "Plastic Simply supported beam Impact Testing Machine"

2.JJG145-2007 "Verification Regulations of Pendulum Impact Testing Machine"

3.GB3808 "Test of pendulum impact Testing Machine"

Applicable standards:

1.GB/T 1043.1-2008 "Rigid plastic simple support beam impact test method"

2.ISO 179-1993（E） "Plastics - Determination of impact strength of simply supported beams"

Technical indicators:

1. Impact energy: 2J/4J（simply supported beam）; 2.75/5.5J（cantilever）

2. Sampling rate: 10us

3. Resolution: 16 bits

4. Load measurement accuracy: ≤1%

5. Impact knife Angle: 30°

6. Pendulum torque: simple beam 2.1436N.m, 1.0718N.m, 0.5359N.m

7. Cantilever beam 2.9474N.m, 1.4737N.m

8. Pendulum prelift Angle: 150°

9. Simple support beam:

1） Impact speed: 2.9m/s

2） The distance from the center of the pendulum shaft to the center of the sample: 230mm

3） Blade Angle: 30°

4） Blade radius: 2mm

5） Support corner radius: 1mm

6） Front Angle of support: 5°

7） Rear Angle of support: 10°

8） Support span: 40, 60, 70mm

9） Sample type and size （length × width × thickness）mm3:80×10×4mm, 50×6×4mm, 120×15×10mm

10. Cantilever beam:

1） Impact speed: 3.5m/s

2） The distance from the center of the pendulum axis to the center of the sample: 335mm

3） Blade Angle: 75°

4） Blade radius: 0.8mm

5） Front edge Angle: 5°

6） Blade back Angle: 10°

7） Sample type and size （length × width × thickness）mm3:

80×10×4mm

63.5 * 12.7 * 12.7 mm

63.5 * 12.7 * 6.4 mm

63.5 * 12.7 * 3.2 mm

Other supplier products

	Industrial chillers	Applicable Standards Industrial chillers adhere to global safety and performance regulations, including: ASHRAE 15(Safety Standard for Refrig...
	Fabric liquid penetration tester	Main Parameters1. The penetrating disc is made of special organic glass through special processing, ensuring a weight of 500 grams ± 5 grams...
	KES - QM Contact Coolness Tester	It is used to measure and evaluate the contact coolness index "q max" (peak heat flux). When the skin comes into contact with fabrics, different am...
	Footwear Cold Insulation Tester	Product Introduction Shoes cold resistance testing machine is used to test finished shoes, rubber, sole, synthetic leather, plastic and other test...
	Fabric Anti-Electromagnetic Radiation Performance Tester	Standards GB/T23326. GB/T25471. ASTM D4935. SJ2054 Application It is used for testing the electromagnetic shielding effectiveness of electromagn...

供应产品

Same products

	Common Rail Injector Valve F00R J02 012	卖方: 868983	Common Rail Injector Valve F00R J02 012 David Chen
	Common Rail Injector Valve F00R J02 005	卖方: 868983	Common Rail Injector Valve F00R J02 005 David Chen
	Common Rail Injector Valve F00R J01 945	卖方: 868983	Common Rail Injector Valve F00R J01 945 David Chen
	Common Rail Injector Valve F00R J01 941	卖方: 868983	Common Rail Injector Valve F00R J01 941 David Chen
	Common Rail Injector Valve F00R J01 924	卖方: 868983	Common Rail Injector Valve F00R J01 924 David Chen