UL1642 Battery Squeeze Machine Nail penetration Testing BE 6047
Application
To test battery safety performance by crushing & nail-penetration through real-time test data ( battery voltage, max. battery temperature, pressure voltage data) to judge test result on the condition of no flame, smoke, explosion after test.
Patent No.:ZL 20102 0232705.3
Features
2.1 The wire enclosed with metal fire-proof cover, which is available to prevent the flame during testing process.
2.2 Lighting system is designed to observe the internal testing process;
2.3 Nail Penetration/Crush Velocity with controllable range of 10~80mm/s;
2.4 Nail Penetration/Crush Force controllable within range from 250N to 13KN ,meet different standards;
2.5 Wire hole provides a possibility to test internal temperature or air pressure while vent hole with air blower can discharge the exhaust air.
2.6 Control system employs independent control cabinet & separated with the test chamber with a distance 1-2 meter, which can reduce the noise and improve safety.
Standard Compliance
Crush Test Standard:
GB/T 2900.11-1988Terminology of (secondary) cell or battery: crush
YD 1268- 2003The safety specification and test method for lithium batteries and charger: crush
SJ/T 11169-1998Standard for lithium batteries: crush
UL 1642Lithium batteries: crush
GB/T 8897.4-2002Primary batteries-Part 4: Safety of lithium batteries
SJ/T 11170-1998Standard for household and commercial batteries- crush test
YDB 032-2009Back-up lithium-ion battery for telecommunications
UL2054Household and Commercial Batteries
QB/T 2502-2000General specification of lithium-ion battery
Nail penetration standard:
GB/T 18332.2-2001Nickel-metalhydratebatteries of electric road vehiclesnail penetrations
MT/T 1051-2007Lithium-ion batteries for cap lampnail penetration test
Technical Parameters
|
Model |
BE-6047 |
|
Pressure(KN) |
20 |
|
Max. Displacement(mm) |
200,300 |
|
Auxiliary Function(Optional) |
Voltage, temperature sampling, camera monitoring system. Fire-extinguishing system, smoke evacuation & filtering system |
|
Crush/Nail-penetrate Speed |
0 ~ 80mm/min(controllable) |
|
Testing Zone(mm) |
200X200X200MM,300X300X300MM (Available to customize) |
|
Overall Dimension |
W750 X D650 X H1900 |
|
Optional Functions |
|
|
Voltage |
0—10V,0--100V |
|
Temp. Sampling Range |
0 ~ 1200℃ |
|
Voltage, Temp. Accuracy |
±1%FS |
|
Voltage Resolution |
1mV |
|
Temp. Resolution |
0.1℃ |
|
Main Technical Parameters |
|
|
Speed |
0 ~ 80mm/min(controllable),200mm/minavailable to customize |
|
Crush/ Nail-penetrate Range |
0—300MM to select |
|
Structure |
Vertical & horizontal(select according to actual size) |
|
Testing Condition |
Applied force of 13KN, once the maximum pressure has been obtained it is to be released. |
|
Crush/Nail-penetrate Method |
Vertical |
|
Crush/ Nail-penetrate Deformation |
No(Computerize can be customized) |
|
Crush/Nail-penetrate Remaining Time |
0~99 hours 99mins 99secs |
|
Driven Method |
Hydraulic |
|
Crush/Nail-penetrate Accuracy |
±1% |
|
High Temp. Resistant Steel Needles |
Diameterφ3mm~φ8mm |
|
Nail-penetration speed Accuracy |
±0.1MM/S |
|
Structure |
|
|
Chamber |
Independent vertical test machine and control system |
|
Communication |
No (computerize can be customized) |
|
Crush Fixture |
Flat crush plate, configurate different clamp according different standards |
|
Nail Penetrate Fixture |
Customize |
|
Data Acquisition Module |
Independent remote sampling, multi-voltage, temperature, current acquisition channel (optional) |
|
Channel Quantity Configuration |
2-Channel, 4-Channel, 8-Channel, multi-data acquisition system (optional) |
|
Camera Monitoring System |
Test zone installed with high definition camera monitoring system in remote control with explosion-proof (optional). |
|
Standard Configuration |
Crush machine 1 set, control cabinet 1 set, crush plate 1 set , diameterφ3mm~φ8mmhigh temperature nail 1 set |
|
Testing Fixture |
Customize according to actual size |
|
Power |
AC380V 50HZ 3 phase 5 wires |
|
Working Environment |
0℃~45℃ |
在线联系供应商
Other supplier products
 |
Comprehensive Environmental Temperature Humidity Vibration Testing Machine | General Intraduction This equipment complied with national standard, able to satisfy special testing requirements ,is widely applied for electronic... |
 |
Lithium Battery Forced Short Circuit Temperature Control Testing Equipment | Introduction Battery large current short-circuit machine is designed to comply with standard; According to the short-circuit test requirement,the s... |
 |
2 or 3-Zone Constant Temperature Thermal Shock Chamber Testing Machine | Applications This equipment is widely applied for electronic and electric products, components and materials by constant high low temperature, temp... |
 |
DGBell Environmental Low / high Temperature & Damp Heat Test Chambers | Application . Standard Compliance : GB/T10586-2006 Specifications for damp heat chambers,GB/T10592-1989 Specification for low/high temperature test... |
|
|
UL1642 Battery Squeeze Machine Nail penetration Testing BE 6047 | Application To test battery safety performance by crushing & nail-penetration through real-time test data ( battery voltage, max. battery tempe... |
Same products
 |
TH 7026 Desktop Welding Magnifying Glass with 10 LED Light | 卖方: Phonefix | TH-7026 Desktop Magnifying Glass Third hand with double magnifier 10 LED for Mobile Phone PCB Cir... |
 |
MECHANIC MEC 4K 2K 高清电子目镜相机，适用于立体显微镜 | 卖方: 深圳市维客修科技有限公司 | 描述 美卡尼克MEC 2K/2K PRO/4K高清电子目镜摄像机，可以将双目立体显微镜改装成三目显微镜。采用SONY 1/2.3"进口CMOS传感器，采用优质CMOS传感器，硬... |
 |
Fluke 15B+ 17B+ 18B+ 数字万用表电压频率测试仪 | 卖方: 深圳市维客修科技有限公司 | iFixes 10CC半透明/全透明/乳白色/浅无铅助焊膏适用于手机主板CPU BGA维修。iFixes助焊剂注射器注射焊膏焊接膏手机整理焊接耗材系列，适用于电路板纳米芯片，手机PCB， SMT... |
 |
HTT-02 Hot Tack Tester | 卖方: Cell Instruments Co., Ltd | The HTT-02 Hot Tack Testeris specifically designed to assess this property by measuring the stren... |
 |
SPC-01 Stretch Film Peeling Cling Tester | 卖方: Cell Instruments Co., Ltd | The SPC-01 Stretch Film Peeling Cling Testermeasures the adhesion between two layers of stretch f... |
