Rubber Low Temperature Brittleness Tester
Whats/App: +86 156 1874 6768
Web: standard-groups.com
The Rubber Low Temperature Brittleness Tester determines the temperature at which rubber and plastic samples become brittle under impact conditions. It allows comparative evaluation of non-rigid plastics and other elastic materials under low temperature environments, assessing advantages, limitations, and low-temperature performance. The equipment uses cascade compressor refrigeration, heat balance, and circulation stirring technology to achieve uniform cooling and precise temperature control. There are two models: one for rubber and one for plastic.
Applications
(1) Rubber automotive parts: tires, seals, hoses.
(2) Footwear components: rubber soles, midsoles, and elastomeric materials.
(3) Industrial rubber products: conveyor belts, vibration dampers.
(4) Plastic components: thermoplastic elastomers, PVC, PU sheets.
(5) Laboratory research: evaluating low-temperature brittleness for R&D of polymers.
(6) Quality control: monitoring material performance in production and ensuring compliance with standards.
Standards
(1) ISO 812 — Rubber, vulcanized or thermoplastic: Determination of low-temperature brittleness
(2) GB/T 15256 — Rubber, vulcanized or thermoplastic: Determination of low-temperature brittleness
(3) JIS K 6261-2006 — Rubber, vulcanized or thermoplastic: Low-temperature property determination
(4) ASTM D2137 — Rubber property: Brittleness point of flexible polymers and coated fabrics
Features
(1) Measures low-temperature brittleness point of rubber and plastic, critical for material selection and durability evaluation.
(2) Uses cascade compressor refrigeration for rapid and uniform cooling.
(3) Precise temperature control with minimal fluctuation (±0.5°C).
(4) Fully automatic cooling and constant temperature maintenance.
(5) Suitable for laboratory research, production monitoring, and quality control.
Technical Parameters
| Item | Specification |
|---|---|
| Temperature control range | -80℃ (room temp ≤25℃); models available for -60℃, -70℃, -80℃ |
| Cooling speed | 0 → -20℃: 1.2–20℃/min -20 → -30℃: 1.0–30℃/min -30 → -40℃: 0.7–60℃/min -40 → -60℃: 0.7℃/min -60 → -80℃: 0.5℃/min |
| Temperature fluctuation (after constant) | < ±0.5℃ within 3 min |
| Overall size | 900 × 505 × 800 mm (L × W × H) |
| Test chamber size | 220 × 170 × 70 mm (L × W × H) |
| Cooling medium | Ethanol or other non-freezing liquid |
| Mixing motor | 15 W |
| Power supply | 220–240 V, 50 Hz, 2 kW |
Test Procedures
(1) Prepare the sample according to the standard size for rubber or plastic.
(2) Fill the test chamber with ethanol or other non-freezing liquid.
(3) Mount the sample securely in the sample holder.
(4) Set the desired target temperature and cooling rate on the controller.
(5) Start the machine; it will cool the sample automatically to the set temperature.
(6) Apply the specified impact to the sample to determine brittleness point.
(7) Record the temperature at which the sample fractures or fails.
(8) Repeat for multiple samples as needed.
Accessories
(1) User manual
(2) Delivery note
(3) Standard sample holders / clamps (depending on material type)
(4) Spare fuses
(5) Cooling medium container (if supplied)
Maintenance
(1) Keep the exterior and interior of the test chamber clean and free from debris.
(2) Replace or replenish cooling medium as needed to maintain proper performance.
(3) Check the mixing motor and compressor regularly for wear or abnormal noise.
(4) Inspect electrical connections and fuses periodically.
(5) Verify temperature calibration periodically using a certified thermometer.
(6) Store the machine in a dry, ventilated environment to prevent corrosion.
在线联系供应商
Other supplier products
 |
ASTM D3786 Pneumatic Bursting Strength Tester | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Bursting Strength Testeris widely used in textile , leather , paper and other... |
 |
JASO D609 AC/DC Voltage Drop Tester for Wires | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The Automotive Wire AC/DC Current-Carrying Capacity Test System is designed t... |
 |
Toys Flammability Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Introduction : The machine is used for the purposes of determining the flammability of t... |
 |
Smoke Density Chamber (Horizontal Test),Smoke density evaluation device,ISO 5659 | Whats/App: +86 156 1874 6768 Web: standard-groups.com The main principle is to measure smoke density in a particular space, cable or material pro... |
 |
Weatherometer Laboratory Testing Equipment(UV) | Whats/App: +86 156 1874 6768 Web: standard-groups.com Features and Benefits 1. UVA-340. UVB-313 and other UV lamps, a single power of 40 watts... |
Same products
 |
PH-2398 pH/EC/ORP/温度 多参数测试仪 | 卖方: 科立龙电子股份有限公司 | 大显示，可同时进行水质PH、氧化还原电位、电导率、温度的测量； 带背光LCD显示清晰，功能齐全，精度高； 仪表采用微电脑测量与控制技术，具有自动校准功能，方便实用。 内置蓝牙，可以与电脑或... |
 |
ORP-2026S 防水型 土壤ORP&温度 二合一测试仪 | 卖方: 科立龙电子股份有限公司 | 范围 ORP -999～999mV Temp 0～50℃ 分辨率 ORP 1mV... |
 |
防水型 EC /TDS/温度三合一参数测试仪 | 卖方: 科立龙电子股份有限公司 | 范围 EC ～19.9mS TDS Temp 0～50℃ 分辨率 ... |
 |
EC-98330 电导率营养测试棒 | 卖方: 科立龙电子股份有限公司 | 本营养测试仪适用于水培和农业应用，能够准确测量水中的营养液电导率（EC）单位为mS/cm，以及总溶解固体（TDS）转换为百万分之一（ppm）。 适合需要较高EC值的植物，该测试仪具有高达6.0... |
 |
PH-808防水笔式土壤PH计 | 卖方: 科立龙电子股份有限公司 | 两点按键校准,自动识别pH标准缓冲液 自动温度补偿确保全量程范围的精确测量。 自动电源关闭，有效节省电池能耗。 可替换型电极降低仪表维护与使用成 全防水性能保障在恶劣环境中对仪表的完整保... |
