Bearing Ring Crack and Hardness Combination Flaw Detector TQJC-02
During the processing of bearing rings, various defects are often generated on the surface or inside, and cracks occupy a large proportion of all defects.
The cause of the cracks in the bearing rings is complicated. From the raw materials to the finished products of the ferrules, if the process is not proper, the cracks may be directly caused or the hidden cracks may be buried for the occurrence of the lap ring grinding cracks.
There are many ways to form cracks in bearing rings: Raw material defects include: cracks in raw materials and the effects of raw material defects on the grinding process.
Forging defects include forging cracks, effects of forged microstructure defects on the grinding process, and cutter cracks. There are also various heat treatment defects and the like. Therefore, crack detection and hardness testing are essential. BKN has considerable experience in crack detection, and Bearing Ring Crack and Hardness Combination crack testing equipmentis a perfect combination.
Bearing Ring Crack and Hardness Combination Flaw Detector TQJC-02 Brief Introduction
Detection process
Vibrating plate and string charging →hardness test→crack detection→automatic blanking
↓
Bad product sorting
Automatic charging —automatic detection—automatic sorting —automatic blanking
Charging mechanism
Hardness testing
Crack detection(the probe uses stainless steel casing+nano abrasion material ) to ensure long-term normal of the probe
Discharging sequencing mechanism
Crack sensitivity: a crack with a depth of ≥0.05 mm and a length of ≥1 mm extending inward from the surface of the ferrule; for a crack that has not extended to the surface inside the ferrule, when the thickness between the subcutaneous surface and the surface of the workpiece is ≤0.2 mm, the depth is ≥0.20 mm Cracks of length ≥ 1 mm can be detected.
Hardness sensitivity: Rockwell 1HRC ~ 2HRC (other parameters remain stable and consistent).
As one of non destructive testing equipment suppliers, we can offer sorts of ndt testingmachines for sale, anything you need, please leave us a message.
在线联系供应商
Other supplier products
 |
Eddy Current Testing Equipment | Are you looking for a perfect eddy current testing machine manufacturer? BOKENAis one of the most professional eddy current test equipment supplier... |
 |
Magnetic Flux Leakage Testing Equipment | Electromagnetic detection is a very important non-destructive testing method and is widely used. Magnetic flux leakage is a magnetic method of nond... |
 |
BKNET-0102 Welded Pipe Eddy Current Flaw Detector | Eddy current testing of welds is the use of eddy current technology to test the welded pipe, this type of testing is based on the premise of lossle... |
 |
BKNFX Pre-Multi-Frequency Eddy Current Hardness Separator | Stimulating the coil makes a magnetic induction to the tested material. The induced electromotive force received by the testing coil is related to ... |
 |
Eddy Current Testing Equipment | Specifications: diameter Φ73 / Φ89 mm, length 9.6m or so Detection speed: 6-20 m / min Acceptance criteria: American Petroleum Institute ... |
Same products
 |
Optical Brightener OB-1 (OBA 393) | 卖方: Jinan Ogilvy Chemical Co., Ltd | Chemical Name: 2-[(Ethylsulfanyl)methyl]phenyl methylcarbamateC.I.: 393CAS: 1533-45-5Molucular Fo... |
 |
PH-A63防水笔式PH/EC/温度三合一测试仪 | 卖方: 科立龙电子股份有限公司 | 特点 基于微处理器的快速准确显示-新的坚固耐用的人体工程学设计-外观时尚,携带方便 大屏幕背光，清晰显示，同时显示温度带自动温度补偿 主机防水等级IP65 电池电量缺电指示 自动关机；使用... |
|
|
PH-A6防水笔式高精度酸碱度/ 温度计 | 卖方: 科立龙电子股份有限公司 | 特点 基于微处理器的快速准确显示-新的坚固耐用的人体工程学设计-外观时尚,携带方便 大屏幕背光，清晰显示，同时显示温度带自动温度补偿 主机防水等级IP65 电池电量缺电指示 自动关机；使用... |
|
|
PH-A8防水笔式土壤PH计 | 卖方: 科立龙电子股份有限公司 | 大屏幕背光，清晰显示，同时显示温度带自动温度补偿 主机防水等级IP65 两点按键校准,自动识别pH标准缓冲液；自动电源关闭，有效节省电池能耗。 两节七号大容量供电。适用于土壤、面团等。 ... |
 |
TH021W 物联网温湿度控制器 | 卖方: 科立龙电子股份有限公司 | 产品说明： 本电子温控器可用于仓储、宠物、养殖、栽培等各种温湿度控制场合，比如给温室、冬季花园加温或降温，以及水族馆水温监控、育种土壤的温控。操作简便，可与任何电热垫或其它加热或冷却设备连... |
