Immediate delivery of titanium carbide powder in stock
The particle morphology of this powder is controllable and can be made into spherical, quasi-spherical or irregular shapes to meet the requirements of different forming processes. Spherical powder has good fluidity and is suitable for laser 3D printing. The density of the printed parts can reach 99.8%, and its mechanical properties are comparable to those of traditional sintered parts. The bulk density of powder can be adjusted by particle size. Fine powder has a low bulk density and is suitable for pressing complex-shaped parts. Coarse powder has a high bulk density and is suitable for forming large-sized green bodies. In the field of personalized medical implants, 3D-printed titanium carbide parts are well compatible with human bones, and they are of high strength and light weight. Titanium carbide powder has excellent chemical stability. It is insoluble in common acids and bases such as water, hydrochloric acid and sulfuric acid, and only corrodes slowly in hydrofluoric acid and hot concentrated sulfuric acid. It is suitable as a raw material for making corrosion-resistant coatings. By spraying it onto the metal surface through the thermal spraying process, a wear-resistant coating with a thickness of 50-200μm can be formed, which can extend the service life of the parts by 5-10 times. The oxygen content of the powder is less than 0.1%, which can reduce the oxidation reaction during the sintering process and ensure the mechanical properties of the product. In oil drilling equipment, the coated drill bits prepared with this powder can withstand the high temperature, high pressure and corrosive environment underground.
在线联系供应商
Other supplier products
 |
The hard alloy guide wheel is made of titanium carbide | This type of guide wheel can be customized with various groove profiles tailored to the specific dimensions and types of wire or pipe, including V-... |
 |
Powder Metallurgy Chromium Carbide Additives | Chromium carbide powder is silver gray in color and is an important metal-ceramic material with the chemical formula Cr₃C₂. It has high hardness ... |
 |
High toughness steel-bonded hard alloy rods | This carbonitride round rod (TiC) is formed by hot-pressing and sintering 99.5% high-purity carbonitride powder. Its diameter ranges from φ5 to... |
 |
Titanium carbide powder with enhanced wear resistance | Titanium carbide powder can be mixed with other carbide powders (such as tungsten carbide and vanadium carbide) to form multi-component composite p... |
 |
Refined chromium carbide powder by gas atomization process | The powder has a high hardness, with a microhardness of up to 2200HV. The hardness of the wear-resistant coating prepared from it can reach over HR... |
