Spray uniform titanium carbide powder without pores
Titanium carbide powder has excellent chemical stability. It is insoluble in common acids and bases such as water, hydrochloric acid and sulfuric acid, and only corrodes slowly in hydrofluoric acid and hot concentrated sulfuric acid. It is suitable as a raw material for making corrosion-resistant coatings. By spraying it onto the metal surface through the thermal spraying process, a wear-resistant coating with a thickness of 50-200μm can be formed, which can extend the service life of the parts by 5-10 times. The oxygen content of the powder is less than 0.1%, which can reduce the oxidation reaction during the sintering process and ensure the mechanical properties of the product. In oil drilling equipment, the coated drill bits prepared with this powder can withstand the high temperature, high pressure and corrosive environment underground. The particle morphology of this powder is controllable and can be made into spherical, quasi-spherical or irregular shapes to meet the requirements of different forming processes. Spherical powder has good fluidity and is suitable for laser 3D printing. The density of the printed parts can reach 99.8%, and its mechanical properties are comparable to those of traditional sintered parts. The bulk density of powder can be adjusted by particle size. Fine powder has a low bulk density and is suitable for pressing complex-shaped parts. Coarse powder has a high bulk density and is suitable for forming large-sized green bodies. In the field of personalized medical implants, 3D-printed titanium carbide parts are well compatible with human bones, and they are of high strength and light weight
在线联系供应商
Other supplier products
 |
High-strength titanium carbide rods - for ceramic processing | The manufacturing process of this round bar is highly stringent, encompassing rigorous control over the purity of titanium carbide powder (purity &... |
 |
Cost-effective titanium carbide powder | Titanium carbide TiC powder are mainly used in the steel-bonded cemented carbide, cermet components, tungsten-cobalt-titanium cemented carbide an... |
 |
Titanium carbide rods for metal forming | Compared with traditional high-speed steel bars, the cutting speed of hard alloy titanium carbide round bars can be increased by 3 to 5 times, whic... |
 |
Titanium carbide powder with enhanced wear resistance | Titanium carbide powder can be mixed with other carbide powders (such as tungsten carbide and vanadium carbide) to form multi-component composite p... |
 |
Durable hard alloy titanium carbide guide wheel | This type of guide wheel can be customized with groove shapes according to the specifications of the wire or pipe, such as V-shaped, U-shaped, semi... |
