High-purity titanium carbide rods for mold repair
Titanium carbide round rods fabricated from cemented carbide exhibit exceptional anti-adhesion properties. When machining sticky materials such as aluminum and copper alloys, these rods significantly reduce the occurrence of built-up edge formation, thereby ensuring a smooth machined surface. Their performance can be further enhanced through coating technologies—such as TiAlN coatings—which improve wear and oxidation resistance, extending tool life by over 50%. In the medical device industry, they are widely used in the production of orthopedic surgical instruments, where they maintain sharpness and dimensional stability under high-temperature sterilization conditions. Due to their excellent electrical conductivity, these rods are also suitable for use as electrodes in electrical discharge machining (EDM). In precision mold manufacturing, they enable high processing accuracy with minimal electrode wear. Furthermore, their superior fatigue resistance makes them resistant to cracking under repeated impact loading, rendering them ideal for components subjected to high-frequency vibrations. In the nuclear energy sector, their outstanding radiation resistance allows for application in machining internal reactor components.
在线联系供应商
Other supplier products
 |
Titanium carbide guide wheel - hard alloy wear-resistant | The installation holes of the guide wheel have high precision, and the fit clearance with the shaft can be controlled within 0.005-0.01mm, ensuring... |
 |
Titanium carbide hard guide wheels for industrial use | 硬质合金碳化钛导轮是线材和管材生产过程中的关键导向部件。该部件采用高纯度碳化钛和钴粘结剂相，通过粉末冶金烧结而成，表面硬度高达HRC88，耐磨性是传统钢制导轮的50倍以上。其圆度误差保持在0.002毫米以内，确保在高速拉拔过程中（高达100米/秒）线材的平稳运动，并有效防止振动或错位。在不锈钢... |
 |
Titanium carbide guide wheels for industrial transmission | This type of guide wheel can be customized with various groove profiles—such as V-shaped, U-shaped, and semi-circular—based on the spec... |
 |
High-quality titanium carbide powder with low oxygen content of less than 1000 ppm | Titanium carbide powder can be mixed with other carbide powders (such as tungsten carbide and vanadium carbide) to form a multi-component composite... |
 |
Refined chromium carbide powder by gas atomization process | The powder has a high hardness, with a microhardness of up to 2200HV. The hardness of the wear-resistant coating prepared from it can reach over HR... |
Same products
 |
99.5% high-purity chromium carbide powder | 卖方: 株洲华斯盛高科材料有限公司 | Chromium carbide powder has excellent wetting properties and is firmly bonded to metal substrates... |
 |
Carbonitride powder for plastic modification | 卖方: 株洲华斯盛高科材料有限公司 | The particle morphology of this powder can be controlled, and it can be made into spherical, near... |
 |
Titanium carbide hard alloy drive wheel accessory | 卖方: 株洲华斯盛高科材料有限公司 | This guide wheel is customizable with various groove geometries—including V-shaped, U-shape... |
 |
Industrial titanium carbide alloy drive wheels | 卖方: 株洲华斯盛高科材料有限公司 | This guide wheel can be customized with various slot shapes according to the specifications of wi... |
 |
Wear-resistant steel-bonded hard alloy round bar | 卖方: 株洲华斯盛高科材料有限公司 | Titanium carbide (TiC)-based cemented carbide round rods exhibit exceptional electrical conductiv... |
