Sintered titanium carbide powder of cemented carbide
Titanium carbide powder has excellent oxidation resistance. It is not prone to oxidation in the air below 600℃, and the oxidation rate at 800℃ is only 0.01mg/(cm²·h), making it suitable for manufacturing high-temperature wear-resistant components. Coating it on the surface of steam turbine blades can resist the erosion and oxidation of high-temperature gas, thereby extending the service life of the blades. The powder has a high grinding efficiency and can be used to make abrasives. When grinding hard alloys, its efficiency is twice that of alumina abrasives. In the processing of optical glass, the grinding tools made of this powder can ensure the high smoothness of the glass surface. Titanium carbide powder has excellent chemical stability. It is insoluble in common acids and bases such as water, hydrochloric acid and sulfuric acid, and only corrodes slowly in hydrofluoric acid and hot concentrated sulfuric acid. It is suitable as a raw material for making corrosion-resistant coatings. By spraying it onto the metal surface through the thermal spraying process, a wear-resistant coating with a thickness of 50-200μm can be formed, which can extend the service life of the parts by 5-10 times. The oxygen content of the powder is less than 0.1%, which can reduce the oxidation reaction during the sintering process and ensure the mechanical properties of the product. In oil drilling equipment, the coated drill bits prepared with this powder can withstand the high temperature, high pressure and corrosive environment underground.
在线联系供应商
Other supplier products
 |
Nano grade titanium carbide alloy round bar | 该圆棒的生产工艺极其严谨，从碳化钛粉末纯度的控制（纯度≥99.5%）到烧结温度的精确调控（约1500℃），每一个环节都影响着最终的性能。成品尺寸稳定性极佳，在-50℃至300℃的温度变化下，热膨胀系数仅为6×10-⁶/℃，远低于金属材料，确保了精密工具在不同环境下的精度。它广... |
 |
Titanium carbide hard alloy guide wheel - Customized version | 这种硬质合金碳化钛导轮具有优异的抗热冲击性能。即使温度从室温骤升至300℃，再骤降至室温，也不会发生开裂，因此适用于间歇性生产环境。导轮尺寸范围广，直径从50mm到500mm，宽度从10mm到100mm，可适配不同类型的拉丝或轧制设备。在光纤和光缆生产中，它可以精确引导光纤，使光纤衰减率保持在... |
 |
Hard alloy titanium carbide guide wheel - transmission | Titanium carbide hard alloy guide wheels are key guiding components in the production of wire and tube materials. They are made by sintering high-p... |
 |
High uniformity of mesh size: titanium carbide guide wheel | The working temperature range of hard alloy titanium carbide guide wheels is wide, and their performance is stable in an environment from -100℃ to ... |
 |
Uniform titanium carbide powder in particle size | This powder has excellent electrical and thermal conductivity, with an electrical conductivity of 3×10⁴S/m and a thermal conductivity of 35W/... |
