Titanium carbide hard rods - suitable for chemical parts
The anti-adhesion performance of titanium carbide round rods fabricated from cemented carbide is exceptional. When machining sticky materials such as aluminum and copper alloys, these rods exhibit a significantly reduced tendency for built-up edge formation, thereby ensuring a smooth machined surface. Their surface properties can be further enhanced through coating technologies—such as TiAlN coatings—which improve wear resistance and oxidation resistance, extending tool life by over 50%. In the medical device industry, they are commonly used in the manufacture of orthopedic surgical instruments, offering not only excellent cutting sharpness but also the ability to withstand repeated high-temperature sterilization without deformation. The length of the round rod can be customized within a range of 100 mm to 1000 mm and is amenable to secondary precision processes such as grinding and wire electrical discharge machining, enabling the production of components with complex geometries. Although the initial cost is higher than that of conventional cemented carbide, the overall cost per unit product is lower when accounting for extended service life and improved processing efficiency. In gear manufacturing, hobs produced from this material ensure gear tooth profile accuracy at ISO quality grade 6 or higher, meeting the stringent requirements of high-performance mechanical transmission systems.
在线联系供应商
Other supplier products
 |
Titanium carbide hard alloy rods are highly hard and wear-resistant | 与传统高速钢棒材相比，硬质合金碳化钛圆棒的切削速度可提高3至5倍，可显著缩短批量生产中的加工时间。其微观组织均匀，晶粒尺寸可控制在1μm以下，确保棒材各部位性能一致，避免因材质不均导致的刀具失效。在模具行业，用其制成的冷冲压模具镶块，其使用寿命是钢制镶块的50至100倍，可显著降低更换频... |
 |
Titanium carbide guide wheel - wear-resistant | The installation holes of the guide wheel have high precision, and the fit clearance with the shaft can be controlled within 0.005-0.01mm, ensuring... |
 |
Titanium carbide rods for electronic molds | Titanium carbide round rods made from cemented carbide exhibit excellent electrical conductivity, making them suitable for use as electrodes in ele... |
 |
Wear-resistant composite material chromium carbide powder | Chromium carbide powder is a grayish-black powder with a melting point of approximately 1890℃ and a Mohs hardness of 8.5. It features excellent wea... |
 |
High-hardness titanium carbide guide wheel | Hard alloy titanium carbide guide wheels exhibit excellent impact resistance, making them highly resistant to cracking or deformation under sudden ... |
Same products
 |
3D printing spherical titanium carbide powder | 卖方: 株洲华斯盛高科材料有限公司 | This batch of titanium carbide powder (TiC) has a purity of over 99.5%, with a particle size cont... |
 |
Titanium carbide hard alloy drive wheel - Specialized | 卖方: 株洲华斯盛高科材料有限公司 | The titanium carbide (TiC) guide wheel is fabricated via high-temperature powder metallurgy sinte... |
 |
Industrial guide wheels, titanium carbide wear-resistant alloy | 卖方: 株洲华斯盛高科材料有限公司 | This carbonized titanium (TiC) guide wheel is formed by high-temperature sintering of 99.5% pure ... |
 |
Unfinished bar stock - heat treatable | 卖方: 株洲华斯盛高科材料有限公司 | This high-purity titanium carbonitride (TiCN) round bar is fabricated via hot-pressing and sinter... |
 |
Steel-based titanium carbide hard alloy round bar | 卖方: 株洲华斯盛高科材料有限公司 | This carbonitride round bar (TiC) is formed by hot-pressing and sintering 99.5% high-purity carbo... |
