Industrial guide wheels - titanium carbide alloy wear-resistant

Hard alloy titanium carbide guide wheels serve as critical guiding components in the manufacturing processes of wire and tubular materials. These components are fabricated through powder metallurgy sintering using high-purity titanium carbide reinforced with a cobalt binder phase, achieving a surface hardness of up to HRC88 and exhibiting wear resistance exceeding 50 times that of conventional steel guide wheels. The roundness deviation is maintained within 0.002 mm, ensuring stable wire movement during high-speed drawing operations and effectively preventing vibration or misalignment. In stainless steel wire production, the implementation of these guide wheels reduces the surface roughness of the wire from Ra1.6 μm to Ra0.4 μm, thereby significantly enhancing product quality. Compared to ceramic guide wheels, this type of guide wheel demonstrates superior toughness, making it less susceptible to fracture under minor impact and reducing replacement frequency. Owing to its favorable cost-performance ratio, this guide wheel has been widely adopted in the tire industry, contributing to improved wear resistance and safety performance of tires.

Other supplier products

	Nano grade titanium carbide alloy round bar	该圆棒的生产工艺极其严谨，从碳化钛粉末纯度的控制（纯度≥99.5%）到烧结温度的精确调控（约1500℃），每一个环节都影响着最终的性能。成品尺寸稳定性极佳，在-50℃至300℃的温度变化下，热膨胀系数仅为6×10-⁶/℃，远低于金属材料，确保了精密工具在不同环境下的精度。它广...
	Titanium carbide rods in stock can be cut as needed	Compared with traditional high-speed steel bars, the cutting speed achievable with titanium carbide hard alloy round bars can be increased by 3 to ...
	Titanium Carbide Powders for Cemented Carbide Preparation	Titanium carbide powder is a kind of grey-black ultra-fine powder, the purity can be up to 99.9% or more, the average particle size between 0.5-5...
	For the manufacturing of high-density titanium carbide rod molds	The anti-adhesion performance of titanium carbide round rods made of hard alloy is outstanding. When processing sticky materials such as aluminum a...
	Reduce the sintering temperature of titanium carbide powder by 200℃	This powder has excellent electrical and thermal conductivity, with an electrical conductivity of 3×10⁴S/m and a thermal conductivity of 35W/...

供应产品

Same products

	3D printing spherical titanium carbide powder	卖方: 株洲华斯盛高科材料有限公司	This batch of titanium carbide powder (TiC) has a purity of over 99.5%, with a particle size cont...
	Titanium carbide hard alloy drive wheel - Specialized	卖方: 株洲华斯盛高科材料有限公司	The titanium carbide (TiC) guide wheel is fabricated via high-temperature powder metallurgy sinte...
	Industrial guide wheels, titanium carbide wear-resistant alloy	卖方: 株洲华斯盛高科材料有限公司	This carbonized titanium (TiC) guide wheel is formed by high-temperature sintering of 99.5% pure ...
	Unfinished bar stock - heat treatable	卖方: 株洲华斯盛高科材料有限公司	This high-purity titanium carbonitride (TiCN) round bar is fabricated via hot-pressing and sinter...
	Steel-based titanium carbide hard alloy round bar	卖方: 株洲华斯盛高科材料有限公司	This carbonitride round bar (TiC) is formed by hot-pressing and sintering 99.5% high-purity carbo...