Titanium carbide guide wheels - made of alloy, durable and hard.
The guide wheel features precisely machined mounting holes, with a controlled shaft-to-bore clearance of 0.005–0.01 mm, thereby eliminating rotational runout and enhancing guiding accuracy. Its design enables low-maintenance operation: no periodic lubrication is required; only routine removal of surface contaminants is necessary. This makes it highly suitable for uninterrupted operation in automated production lines. In metal wire mesh manufacturing, the guide wheel ensures consistent mesh aperture uniformity, maintaining dimensional deviation within ±5%, fully satisfying the stringent tolerances demanded by high-performance filtration media. Dynamic balance is certified to ISO 1940–1 Grade G0.4, resulting in vibration amplitudes below 0.01 mm even at elevated rotational speeds—effectively suppressing mechanical noise and improving overall workshop acoustic conditions. Chemically inert toward common metal wire substrates, the guide wheel prevents surface contamination, discoloration, or interfacial reaction. Particularly in precious metal wire processing (e.g., gold and silver wires), its non-reactive, ultra-clean surface minimizes metallic adhesion and material loss, thereby reducing scrap rates and lowering production costs.
在线联系供应商
Other supplier products
 |
Sintering shrinkage stabilised titanium carbide powder | Titanium carbide powder has high sintering activity and can be sintered densely at 1300-1500°C, which is 200-300°C lower than the sintering... |
 |
High-purity 99.5% titanium carbide TiC powder | Titanium carbide powder has high sintering activity and can be sintered densely at 1300-1500℃, which is 200-300℃ lower than the sintering temperatu... |
 |
Industrial guide wheels - made of titanium carbide | The surface of the guide wheel can be specially treated as required. For instance, after being sprayed with a diamond coating, its wear resistance ... |
 |
Titanium carbide powder for photovoltaic cutting tools | Titanium carbide powder can be mixed with other carbide powders (such as tungsten carbide and vanadium carbide) to form multi-component composite p... |
 |
Compressive strength over 3000MPa titanium carbide rods | titanium carbide round bars can be customised with different properties by adjusting the titanium carbide content (usually 70-90%) and binder ratio... |
