Silica Sol Investment Casting

The silica sol also shares the name of water glass in general, it is used by the meatal casting process as mold adhesive which is mixed with sand and several other materials. The silica sol is applied to both sand casting and investment casting technics. It is one of the most common investment casting processes. As the molding material, silica sol is able to stand temperature up to 1800℃. Similar to other investment casting processes, the silica sol investment castingprocess mainly consisted of wax injection, assembly, shell preparation, dewax, pouring, cut-off, and finished casting, etc.

Compared to the resin investment casting, the silica sol method dewaxes into the high-temperature water, and the ceramic mold is made of water glass quartz sand. The surface quality is not as good as the resin casting, but it's cheaper and a bigger-sized part could be manufactured than silica sol casting.

Application of Silica Sol Casting

Mainly the silica sol is applying to the precision casting, because of its relatively high production cost but gives out a very fine accurate dimension, nice surface finish, and very good quality result overall. One of the other advantages for silica sol is that the internal defects such as porosity, holes, shrinkage are better controlled compared to another way of casting. So when you looking for a method to produce a small part but with high accuracy, surface demand, high corrosion resistance and you don't want to waste time waiting for the casting quality in slow improved gradually, silica sol investment casting is surely on your options list.

The Basic Property of the Product Made by Silica Sol Casting:

dimension tolerance ±0.1mm, CT4~6；

surface finish Ra6.3;

wall thickness up to 1mm;

unit weight extent 0.1~100kg;

unit size limitation 0.01~0.5 meter;

degree of complexity- very complex;

machining required- less or none due to its accurate dimension;

production lead time- long;

production cost- high;

Influence Factor in Silica Sol Investment Casting

The whole casting process has more than 40 procedures, the process is complex, and there are many process factors that affect the casting quality.

There are many kinds of raw and auxiliary materials, such as silica sol, wax, zircon sand, molybdenum powder, defoamer, wetting agent, steel, rare metal, etc. According to the different mesh, there are more than 10 kinds of sols, including precision casting surface silica sol, precision casting backside silica sol, ordinary silica sol, enhanced silica sol, fast-drying silica sol, and zirconia powder. It is not suitable to control its quality, which affects the casting quality in different degrees.

The production cycle is long and there are many uncontrollable factors. In the whole process, only the shell-making process takes 3-5 days. It takes 6-8 hours to dry the surface shell of silica sol, 4-6 layers to dry the back shell of silica sol, and 8-12 hours to dry the shell without silica sol. There are too many uncontrollable factors and defects will be formed with slight deviations in the process operation.

Rayforce Manufacture is a privatemetal casting supplier, we provide metal casting china, vacuum die casting and etc. Want to know more? Please contact us.

Other supplier products

	Vacuum Die Casting	The vacuum pressure casting, as this name indicates, is casting method which the major processes including the melting, pouring, solidifying are pe...
	Vacuum Die Casting	The vacuum dies casting, as this name indicates, is a casting method in which the major processes including melting, pouring, solidifying are perfo...
	Sand Casting	Sand casting chinais the most commonly applied method for casting the metal part. It suits most of the raw materials, ferroalloy, and non-ferroallo...
	Metal Casting	Casting process usually refers to the metal casting process, is one of heating processing technologies handled by humans can be found recorded as e...
	Resin Sand Casting	Resin sand castingis a kind of floor molding process, by mixing the resin with quartz sand and solidification agent, to create the very hard and so...

供应产品

Same products

	METAL BRACKETS	卖方: JCL Precision Part Co.Ltd.	Custom metal brackets are some of the strongest supports. JCL precision-engineers them to your cu...
	陶瓷型芯注射机	卖方: 秦皇岛埃孚科技有限公司	陶瓷型芯注射机主要用于形状复杂，高品质、高精度铸件的陶瓷型芯的成型。该设备通过吸收国内外先进制造技术和精铸行业的自身特点，研制开发成功。 合模力：35T-100T
	压蜡机	卖方: 秦皇岛埃孚科技有限公司	注蜡机用于精密铸造生产中蜡模的制作。合模力最大 ：10T-150T
	全自动脱蜡釜	卖方: 秦皇岛埃孚科技有限公司	脱蜡釜，是精铸生产中的型壳脱蜡专用设备 内腔尺寸: Φ1000×1200mm/ Φ1200×1500mm/ Φ1400×1600mm
	CNC TURNING	卖方: Baoji Haiqiao Industrial & Trading Co., Ltd.	As a CNC turning manufacturerin China, HQ has the capacity to dealing with both small lot and mas...