Lithium Battery Forced Short Circuit Temperature Control Testing Equipment
Introduction
Battery large current short-circuit machine is designed to comply with standard; According to the short-circuit test requirement,the short-circuit must be less than 5 mΩ to achieve maximum current; In additional, a load-bearing capacity must be designed in electrical system for short-circuit system. Thus, Bell R&D team selects industrial DC magnetic contact with full copper terminal and internal copper current conduction, and internal active bead axial fan is mounted to cool to ensure the test system more safer and reduce the test machine power consumption and enable the test data in accuracy.
Test judgment standards:no flame or explosion after battery short-circuit test.
Standard Compliance
GB/T 18332.2-2009Nickel-metal hydridevehicles
QC/T 741-2006 Ultracapacitors for vehicles
QC/T 742-2006Lead-acid batteries for electric vehicles
QC/T 743-2006 Lithium-ion batteries for electric vehicles
QC/T 744-2006 Nickle-metal hydride batteries for electric vehicles
Vehicles battery related international standard (ISO/IEC/SAE/JEVA/CENetc.)International Standard Associationand 863 plan electric vehicles major projects related test specification
QB/T 2947.3-2008Electric bicycles-cell or battery and chargers Part 3:Li-ion batteries and chargers
DB12/T246-2005 Lithium batteries for electrical bicycles test specification
GB 19521.11-2005Safety code for inspection of hazardous properties for dangerous goods of lithium batteries
Technical Parameters
Model |
BE-1000W |
BE-2000W |
BE-3000W |
BE-5000W |
BE-10000W |
|
Max. Operating Current(A) |
1000 |
2000 |
3000 |
5000 |
10000 |
|
Rated Insulation Voltage(V) |
1000 |
1000 |
1000 |
1000 |
1000 |
|
Internal Resistance System |
≤100mΩ |
≤5mΩ |
||||
Additional Function |
Voltage, Current Temperature Sampling, Camera Monitoring system, Fire-extinguishing system, explosion-proof system, smoke evacuation system . |
|||||
Short-circuit Method |
Low temp. Ambient temp. High temp. |
|||||
Operating Method |
Long distance wireless control |
|||||
Explosive-proof Cabinet Specification(mm) |
500X500X500MM, 800X800X800MM, 1000X1000X1000MM, can customize |
|||||
Overall Dimension |
According to actual design |
|||||
Configuration |
||||||
Voltage |
0—10V,0--100V,0—1000V |
|||||
Temp. Sampling Range |
-200℃ ~ 1200℃ |
|||||
Voltage, Temperature Accuracy |
±1%FS |
|||||
Voltage Resolution |
1mV |
|||||
Temp. Resolution |
0.1℃ |
|||||
Main Technical Parameters |
||||||
Max. instantaneous current |
1500A |
2500A |
3500A |
6000A |
12000A |
|
Response time |
≤5μs |
|||||
Short residence time |
0~999S,time and state controllable |
|||||
Current Accuracy |
±1%FSR,resolution:0.1A |
|||||
Max. Specimen Dimension |
1000X1000X1000MM |
|||||
Resistance Material |
Copper |
|||||
Acting Time |
Pick-up time/ release time ,less than 30ms |
|||||
Driven Method |
Electric |
Pneumatic |
Electric |
|||
Temperature Control Type Explosion-proof Cabinet Technical Parameters |
||||||
Temp. Range |
0℃~100℃(Controllable ) |
|||||
Control Accuracy |
0.01℃ |
|||||
Temp. Fluctuation |
±0.5℃ |
|||||
Temp. Uniformity |
±2℃ |
|||||
Compressor |
French Tecumseh Compressor |
|||||
Observation Window |
Rectangle multi-layer explosive-proof tempering glass with stainless steel protective screening |
|||||
Explosive-proof decompression device |
with auto decompression devices |
|||||
Air Exhaust System |
Air exhaust system on top cabinet |
|||||
Structure |
||||||
Cabinet |
Independent vertical & horizontal test machine and control system |
|||||
Communication |
Adopt R232,485 communication interface, ensure stability and real time of remote sampling, with explosive-proof function |
|||||
Fixed Clamp |
Connector or customize clamp according to samples provided |
|||||
Data Sampling module |
Independent remote sampling, multi voltage, temp., current acquisition channels (optional ); |
|||||
Standard channel quantity |
2-channel,4-channel,8-channel,various data acquisition system (optional ) |
|||||
Camera Monitoring System |
Test zone installed with high definition camera monitoring system in remote control with explosion-proof (optional). |
|||||
Standard Configuration |
Short-circuit host, data acquisition system, explosion-proof system (camera monitoring, fire-fighting system, smoke exhaust system optional) |
|||||
Safety Protection |
Electric leakage, over-temp., over-voltage, over-current, fault alarm, smoke alarm lamp. |
|||||
Testing Fixture |
Customize according to actual testing condition |
|||||
Power |
AC220V 50HZ |
|||||
Working Environment |
0℃~45℃ |
在线联系供应商
Other supplier products
Tensile Test Machine 5KNS | Application This equipment is designed and manufactured tomeasure & test tensile strength, compression strength, peeling strength, tearing... | |
Double Wings Package Drop Impact Tester Drop Testing Machine BF F 415D | Applications Drop Impact Test machineis to test large and heavy package products’ drop impact performance throughsimulate real face ,edge and... | |
High Low Temperature/ Alititude Test Chamber BTHQ series--Standard Vacuum Chamber | Applications This equipment is widely applied for aviation, communication ,electronic etc. industries, instruments and meters ,electric products, m... | |
Lithium Battery Forced Short Circuit Temperature Control Testing Equipment | Introduction Battery large current short-circuit machine is designed to comply with standard; According to the short-circuit test requirement,the s... | |
Comprehensive Environmental Temperature Humidity Vibration Testing Machine | General Intraduction This equipment complied with national standard, able to satisfy special testing requirements ,is widely applied for electronic... |
Same products
BS EN 12600 双轮胎冲击体 | 卖方: 秦皇岛源辰科技设备有限公司 | 参考标准: BS EN 12600:2002建筑用玻璃。摆锤试验。平板玻璃的冲击试验方法和分类 技术数据: 1)充气轮胎冲击器: 重量:50kg±0.1 kg 胎压:0.35Mp... | |
Pct高压高低温试验箱 | 卖方: 广东艾思荔检测仪器有限公司 | HAST PCT高低温耐压试验箱广泛应用于多层线路板、IC封装、液晶屏、LED、半导体、磁性材料、钕铁硼、稀土、磁铁等产品的密封性测试,可测试上述产品的耐压性和气密性。 | |
工业用可编程加速老化测试仪 | 卖方: 广东艾思荔检测仪器有限公司 | HAST(高加速应力测试)是一种用于评估电子元件和其他材料在高温和高湿条件下的可靠性的测试。HAST测试箱是一种设备,它提供了受控的高温和湿度条件,以模拟老化和降解对材料的影响,比正常使用的时间... | |
CE认证实验室设备运输振动测试仪Un38.3标准 | 卖方: 广东艾思荔检测仪器有限公司 | CE认证实验室设备运输振动测试仪适用于玩具、电子产品、家具、礼品、陶瓷、设备等包装的耐振动测试。,在模拟运输条件下,根据美国和欧盟运输标准(ASTM,ISTA) | |
大型模拟运输振动测试仪 | 卖方: 广东艾思荔检测仪器有限公司 | 本机适用于各种包装材料、PC板、电器产品等的运输间损伤模拟试验。 |