Chromium carbide powder with strong resistance to abrasive wear
The main methods for preparing this powder include the electric arc furnace method and the carbothermal reduction method. Among them, the powder produced by the carbothermal reduction method has a finer particle size and a lower cost, making it suitable for large-scale application. When the oxygen content of the powder is less than 0.2%, it can reduce the pores and inclusions in the coating and improve the density of the coating. After spraying chromium carbide powder on the surface of the valve tappets of a car engine, the wear of the tappets can be reduced by 80%, and the major overhaul cycle of the engine can be prolonged.
在线联系供应商
Other supplier products
 |
Micron-sized chromium carbide powder with particle size ranging from 1 to 5 micrometers | This carbonized chromium powder (Cr₃C₂) has a purity of over 99.5%, with a particle size ranging from 0.5 to 5 μm, a density of 6.68 g/cm³.... |
 |
Anti-bending and non-deformation titanium carbide guide wheel | Titanium carbide guide wheel is a high-performance transmission component made of titanium carbide as the core material. It is extremely high hardn... |
 |
Stamping die carbide round bar | Titanium carbide round bar, also known as TiC bar, is a kind of metal-ceramic bar with steel as the binding phase and titanium carbide as the hard ... |
 |
Factory direct sale titanium carbide powder | Titanium Carbide TiC is an extremely hard (9-9.5 on the Mohs hardness scale) refractory ceramic material similar to tungsten carbide. It is a bla... |
 |
Spray uniform titanium carbide powder without pores | Titanium carbide powder has excellent chemical stability. It is insoluble in common acids and bases such as water, hydrochloric acid and sulfuric a... |
